Description :

Available in Myerstown, Pennsylvania, this Caterpillar D334 diesel generator set for sale is being offered at $12,500 and combines a Caterpillar D334 diesel engine with a Lima Electric Motor Co. generator end rated at 200 kW / 250 kVA standby duty.

Several important details have now been confirmed by the seller. The generator has been rewired by an electrician to 277/480 volts and has been load tested to 175 kW. The hour meter currently displays approximately 416 hours, but the seller reports that the meter does not appear to be functioning, so the displayed reading should not be considered a verified total-hour figure.

The seller describes the unit as a good machine and reports that it has been through the shop. Combined with the confirmed voltage reconfiguration and 175 kW load test, this gives prospective commercial, agricultural, and industrial buyers more useful information for evaluating the generator for standby or facility-power applications.

Caterpillar D334 Diesel Power

This generator set is powered by a Caterpillar D334 diesel engine.

For buyers specifically looking for an older mechanical Caterpillar-powered generator, the D334 provides a straightforward industrial diesel powerplant paired here with a substantial Lima generator end.

The unit operates at 1,800 RPM and 60 Hz, according to the generator identification plate.

Because this is an older generator set and the exact engine serial information has not yet been supplied, buyers should verify engine identification and any engine-specific specifications important to service, parts sourcing, or their intended installation.

Rewired to 277/480 Volts

One of the most important updates to this machine is its current electrical configuration.

The seller reports that the generator was professionally rewired by an electrician to 277/480 volts.

That is the current voltage configuration that should be used when marketing the machine rather than relying solely on the alternate voltage information stamped on the original Lima generator plate.

The generator nameplate also documents other voltage and amperage configurations associated with the generator end, including 120/240 volts and 208/416 volts. Those nameplate values remain useful for identifying the generator, but buyers should understand that the seller reports the machine is currently wired for 277/480-volt operation.

Prospective buyers should have their electrician confirm the current connection, output voltage, phase configuration, grounding arrangement, breaker requirements, and compatibility with their facility before installation.

Load Tested to 175 kW

The seller reports that this generator has been load tested to 175 kW.

This is an important distinction from simply advertising the generator based on its nameplate capacity. A load test places an actual electrical load on the generator and provides buyers with additional information about how the unit performs under demand.

The listing should therefore advertise this machine as:

200 kW standby-rated generator end / load tested to 175 kW

It should not be described as having a confirmed 175 kW continuous-duty rating unless supporting Caterpillar or generator documentation specifically establishes that duty rating for this complete generator-set configuration.

Likewise, the 200 kW nameplate rating should not be interpreted as a claim that the seller recently load tested the generator to 200 kW. The confirmed seller-reported load-test figure is 175 kW.

Lima 200 kW / 250 kVA Generator End

The generator end is manufactured by Lima Electric Motor Co., Inc. of Lima, Ohio.

The identification plate provides the following information:

Manufacturer: Lima Electric Motor Co., Inc.
Model: 2840-816
Frame: 580
Generator Serial Number: A23821RG
Rated Output: 200 kW
Rated Apparent Power: 250 kVA
Power Factor: 0.8
Frequency: 60 Hz
Operating Speed: 1,800 RPM
Duty: Standby

The plate also identifies Lima Electric Motor Co. as a subsidiary of CONDEC Corporation.

This readable generator identification plate is particularly helpful for buyers evaluating an older industrial generator because it provides actual equipment-specific electrical information rather than relying entirely on generalized specifications.

416 Hours Displayed — Hour Meter Disclosure

The machine's hour meter currently displays approximately 416 hours.

However, the seller reports that the hour meter does not appear to be working.

Because of that, this generator should not be advertised as having only 416 actual hours.

The appropriate representation is:

Hour meter displays 416 hours; meter appears nonfunctional, and actual total operating hours are not verified.

This disclosure gives buyers the information visible on the machine without creating the impression that 416 hours represents the complete operating history.

For an older standby generator, actual operating hours can be difficult to determine when a meter stops recording. Buyers should evaluate the generator based on its current operating condition, testing information, engine condition, electrical output, service history, and independent inspection rather than relying solely on the displayed meter reading.

Reported Shop Attention

The seller reports that the generator has been through the shop and describes it as a good machine.

The exact repairs, maintenance, fluids, filters, electrical work, or other service completed during that process have not yet been itemized.

The known electrical work includes the seller-reported professional rewire to 277/480 volts, and the generator has subsequently been load tested to 175 kW.

Any available invoices, service records, load-bank documentation, or additional details regarding the shop work would provide useful supporting information for a prospective buyer.

Commercial, Agricultural and Industrial Applications

A diesel generator in this output class may be considered for a wide range of stationary power applications, depending on the electrical requirements of the facility.

Potential applications may include:

• Agricultural facilities
• Dairy and livestock operations
• Manufacturing facilities
• Commercial buildings
• Warehouses
• Equipment and repair shops
• Pumping operations
• Industrial facilities
• Emergency backup-power systems
• Facility standby power
• Remote or stationary equipment installations

Generator sizing should be based on the buyer's actual load requirements, motor-starting demands, voltage, phase, transfer equipment, electrical distribution system, and applicable electrical codes.

$12,500 Asking Price

This Caterpillar D334 generator set is priced at $12,500 in Myerstown, Pennsylvania.

Its strongest documented selling points include the Caterpillar diesel powerplant, Lima 200 kW / 250 kVA standby-rated generator end, current 277/480-volt configuration, and seller-reported 175 kW load test.

The hour meter displays 416 hours, but because the meter does not appear to be working, actual total operating hours remain unverified.

Trustworthy Equipment LLC is marketing this generator on behalf of the seller and can help connect qualified buyers with the appropriate party.

Nationwide transportation assistance may be available through independent transportation providers. Financing assistance may also be available to qualified buyers through independent financing providers. Approval, rates, terms, and conditions are determined by the financing provider.

Buyers are encouraged to inspect the generator, confirm the current 277/480-volt electrical configuration, review the hour-meter condition, and verify performance and specifications important to their intended application before completing a transaction.