Offered at $40,000 OBO, this 2015 John Deere 437D log loader is located in Paradise, PA, with approximately 14,000 reported hours. The seller says it has recently been through the shop and fully serviced, making its recent maintenance history a useful starting point for serious buyer inquiries.
Buyers searching for a log loader for sale in Pennsylvania can contact Trustworthy Equipment LLC using stock number ES265. Discuss the completed service, confirm the actual loader configuration and equipment included, and arrange an inspection with the seller. The accompanying stock image is an AI-generated representation rather than a photograph of this unit.
General Specs
- Seller reports that the loader was recently through the shop.
- Seller describes the machine as fully serviced; specific procedures and replaced components have not been documented in the supplied notes.
- Approximately 14,000 seller-reported hours.
- Featured stock image is AI-generated and does not depict the actual unit or verify its configuration.
The seller reports that this 2015 John Deere 437D has recently been through the shop and fully serviced. That recent service attention is the seller-provided background available for this loader.
This 2015 John Deere 437D log loader is offered in Paradise, Pennsylvania, for $40,000 OBO. Showing approximately 14,000 seller-reported hours, the loader has recently been through the shop, and the seller reports that it has been fully serviced.
John Deere 437D Log Loader for Sale
For a logging contractor, timber buyer, or wood-products business searching for a used John Deere log loader, this unit offers a clearly identified model, reported service attention, and an asking price open to reasonable offers. It is available in Lancaster County, Pennsylvania, for buyers evaluating forestry equipment in Pennsylvania and the surrounding region.
Published 437D Model Specifications
John Deere’s D-Series technical brochure lists a 6.8-liter, six-cylinder 6068T PowerTech E diesel, rated at 173 peak horsepower at 2,000 rpm. The 437D reference configuration has a 32-foot knuckleboom and load-sensing hydraulics with a tandem variable-displacement axial-piston main pump.
These are general model specifications requiring seller verification. They do not confirm the engine, boom, options or current performance of this particular loader. The factory lift chart varies by radius and load height; for example, the 27,046-pound figure applies over front at a 10-foot radius and 10-foot load-point height, with no heel and bare pin.
Recent Shop Attention
The seller states that the machine was recently through the shop and fully serviced. That is useful background for a buyer assessing a higher-hour loader, but the service statement does not establish that individual components have been rebuilt or replaced. Buyers should discuss the work performed directly with the seller and review any available service documentation.
Evaluate the Loader for Your Operation
When comparing a forestry log loader for sale, consider the actual boom and grapple configuration, hydraulic operation, structural condition, operator controls, mounting arrangement, and transportation requirements. Confirm the equipment included in this sale and the specifications needed for your intended work during an inspection.
The advertised hours are seller reported. The stock image is an AI-generated representation and does not show this particular machine, its current condition, or its included equipment.
Price and Inquiries
Asking $40,000 or best offer. Contact Trustworthy Equipment LLC and reference ES265 to connect with the seller, discuss the loader, and arrange an inspection in Paradise, PA.
Trustworthy Equipment LLC is marketing this unit on behalf of the seller and can help connect qualified buyers with the appropriate party. Buyers should inspect the equipment and verify specifications important to their intended use before purchase.
Specifications are believed to be accurate but are not guaranteed and may vary by unit. Buyers should independently verify all specifications, features, and condition prior to purchase.
General model specifications — seller verification required. The reference figures below come from John Deere’s D-Series brochure, revision 15-05, for the 437D. They describe a published model configuration, not an inspection or confirmation of ES265. Actual engine, boom, attachments, dimensions and capacities must be verified with the seller.
Seller-provided unit details
| Year / make / model | 2015 John Deere 437D |
|---|---|
| Hours | Approximately 14,000, seller reported |
| Price | $40,000 OBO |
| Location | Paradise, Pennsylvania 17562 |
| Stock number | ES265 |
| Service | Seller reports recent shop service and describes the loader as fully serviced |
Engine — published model reference
| Engine | John Deere 6068T PowerTech E |
|---|---|
| Fuel / aspiration | Diesel / turbocharged |
| Cylinders / displacement | 6 / 6.8 L (415 cu in) |
| Peak power | 129 kW (173 hp) at 2,000 rpm |
| Emissions rating in brochure | EPA Tier 2; verify installed engine and current configuration |
| Air filtration | Primary and secondary filter elements |
| Cooling fan | Variable-speed suction fan |
Hydraulics and controls — published model reference
| Main hydraulic system | Pressure-compensating load-sensing system |
|---|---|
| Main pump | Tandem variable-displacement axial-piston design |
| Swing circuit | Dedicated load-sensing, open-center circuit |
| Controls | Hydraulic pilot levers |
| Hydraulic refill method | Hand pump through return filters |
| Hydraulic flow / pressure | Numeric ratings are not provided in the supplied brochure |
Boom, swing and lift — published model reference
| Knuckleboom reach | 32 ft (approximately 9.75 m) |
|---|---|
| Continuous rotation speed | 10.6 rpm |
| Swing drive | Two-stage planetary reduction with pinion |
| Swing torque | 36,000 lb-ft (48,809 Nm) |
| Lift example at 10-ft radius | 27,046 lb at 10-ft load-point height |
| Lift example at 20-ft radius | 16,191 lb at 10-ft load-point height |
| Lift example at 30-ft radius | 11,280 lb at 10-ft load-point height |
| Lift-chart conditions | Over front, no heel, bare pin; radius measured horizontally from rotation centerline. Account for attachments and actual setup before use. |
Electrical and operator station — published model reference
| Electrical voltage | 12 V |
|---|---|
| Battery arrangement | 2 batteries; brochure lists 925 CCA |
| Lighting arrangement | 4 front, 2 rear and 1 on each side of cab |
| Cab | Enclosed, air-conditioned model-family cab; verify actual equipment and operation |
Dimensions and weight — published model reference
| Standard operating weight | 32,980 lb (14,959 kg); verify actual transport weight |
|---|---|
| Published weight basis | Standard equipment, half-full fuel tank, fluids, 175-lb operator and grapple; brochure labels the row 'less attachment' |
| Machine height | 13 ft 6 in (4,112 mm), illustrated setup |
| Transport width | 2,606 mm (approximately 102.6 in; brochure rounds to 8 ft 7 in) |
| Tail swing | 8 ft 5 in (2,563.7 mm) |
| Stabilizer spread at ground | 17 ft 5 in (5,309 mm) |
| Lower frame length | 12 ft 6 in (3,810 mm); this is not total transport length |
| Stabilizer travel below grade | 10 in (257 mm) |
| Stabilizer pad dimensions | 21 × 35 in (533 × 889 mm) |
| Illustrated trailer height | 3 ft 2 in (972 mm); does not confirm a trailer is included |
Refill capacities — published model reference
| Fuel | 340 L (90 US gal, brochure rounded) |
|---|---|
| Cooling system | 21 L (brochure rounds to 6 US gal) |
| Engine crankcase | 19 L (5 US gal, rounded) |
| Hydraulic tank | 379 L (100 US gal, rounded) |
| Swing gearbox | 0.8 L (0.2 US gal, rounded) |
| Pump-drive gear case | 4.3 L (1.1 US gal, rounded) |
Hydraulic cylinder dimensions — published model reference
| Main boom cylinder | 1; 180-mm bore, 95-mm rod |
|---|---|
| Jib cylinder | 1; 160-mm bore, 95-mm rod |
| Stabilizer cylinders | 4; 140-mm bore, 70-mm rod |
Published fluid-change intervals
| Engine oil | 500 hours |
|---|---|
| Hydraulic oil | 2,000 hours |
| Engine coolant | 6,000 hours |
| Gearbox oil | 1,000 hours |
| Service qualification | Reference intervals only; follow the serial-specific operator manual and service conditions. These intervals do not document the seller’s completed service. |
Reference: John Deere D-Series technical specifications, 437D column, pages 14–15. Optional circle-saw and self-propelled-trailer hydraulic provisions described in the brochure are not confirmed on ES265.
Buyers evaluating a used John Deere log loader should compare the individual machine as carefully as the model designation. For this 2015 437D, the key seller-provided details are its approximately 14,000 hours and recent shop service.
A service statement is most helpful when supported by a discussion of what was checked, adjusted, or replaced. Before purchasing, ask about the recent shop visit and evaluate the machine through an in-person inspection and operating demonstration. Check the components and specifications relevant to your loading work, and confirm the mounting arrangement, included equipment, and transportation requirements.
This forestry log loader for sale is based in Paradise in southeastern Pennsylvania. Its location may be practical for contractors and wood-products businesses comparing equipment in the Mid-Atlantic region. Buyers searching for a log loader for sale in Pennsylvania can reference ES265 when requesting more information.
The asking price is $40,000 OBO. Trustworthy Equipment markets the loader on the seller’s behalf; the seller is the source of unit-specific condition and service information. Representative stock imagery should not be used to infer this loader’s condition, boom, grapple, mounting equipment, or options.
Explore Similar Equipment
SOLD
