Available in Beach Creek, Pennsylvania, this 2005 CASE 430 skid steer for sale has 3,980 seller-reported hours and is priced at $18,500. The seller reports that the machine runs really good and is in very good condition, and the sale includes both a bucket and pallet forks, giving the next owner two useful attachments from the start.

The CASE 430 is a mid-size wheel skid steer built around a roughly 2,000-pound rated operating capacity, making it useful for construction, farm, property-maintenance, material-handling, landscaping, snow removal, and general loader work. Its combination of manageable dimensions, diesel power, hydraulic attachment capability, and skid-steer maneuverability makes it a practical machine for buyers who need more capability than a smaller loader without moving into a larger, heavier machine.

CASE 430 Diesel Skid Steer

The supplied serial number, N5M419047, corresponds with industry records identifying this machine as a 2005 CASE 430.

Published specifications for this generation of CASE 430 commonly list a diesel engine producing approximately 74 net horsepower, paired with a hydrostatic four-wheel-drive system. That power level gives the machine enough capability for bucket loading, fork work, grading, material movement, cleanup, and many common skid-steer attachments.

The 430 uses a compact wheel-loader configuration that is particularly useful in areas where maneuverability matters. Farms, construction sites, yards, shops, material-storage areas, and properties with limited operating space can all benefit from the skid steer's ability to turn tightly and work in relatively confined areas.

Approximately 2,000-Lb Rated Operating Capacity

One of the most important specifications on the CASE 430 is its approximately 2,000-pound rated operating capacity.

Published specifications commonly list:

• Rated operating capacity: approximately 2,000 lb
• Tipping load: approximately 4,000 lb
• Net engine power: approximately 74 hp
• Standard auxiliary hydraulic flow: approximately 21 GPM
• Hydraulic pressure: approximately 3,000 PSI
• Fuel capacity: approximately 22 gallons
• Standard tire size commonly listed as 12 x 16.5

Actual capacity and operating performance can vary based on attachments, tires, machine configuration, operating conditions, and load position.

For buyers intending to handle palletized material, the included forks add considerable usefulness. Actual load weight, load center, attachment weight, terrain, and operating conditions should always be considered when determining safe lifting capacity.

Bucket and Forks Included

This machine is being sold with both a bucket and pallet forks.

That gives a buyer the flexibility to move between common loader applications without immediately purchasing another basic attachment.

The bucket can be useful for:

• Dirt and gravel
• Stone
• Mulch
• Manure
• Feed
• General cleanup
• Landscaping material
• Construction debris
• Light grading
• Snow and loose material

The pallet forks can expand the machine into material-handling applications such as:

• Palletized supplies
• Building materials
• Farm supplies
• Shop materials
• Lumber
• Equipment parts
• Feed and seed pallets
• General loading and unloading

Buyers should verify the bucket width, fork dimensions, fork capacity, and attachment-coupler configuration before purchase if those measurements are important to their application.

Hydraulic Attachment Capability

The CASE 430 was designed as a versatile skid-steer platform capable of operating a range of hydraulic and non-hydraulic attachments.

Published specifications for this generation commonly list approximately 21 GPM of standard hydraulic flow at roughly 3,000 PSI. High-flow hydraulic systems were available on some configurations, but the hydraulic package installed on this particular machine should be verified before pairing it with a high-flow attachment.

Depending on the machine's actual hydraulic and coupler configuration, a CASE 430 may be suitable for attachments such as:

• Buckets
• Pallet forks
• Grapples
• Augers
• Hydraulic breakers
• Trenchers
• Snow attachments
• Brooms
• Landscape attachments
• Material-handling attachments

Attachment compatibility and hydraulic requirements should always be checked against the actual machine before use.

Compact Size With Useful Loader Capability

The CASE 430 falls into a useful middle range for buyers needing respectable lifting capability while retaining a relatively compact footprint.

Published model information commonly lists an operating weight in the approximately 6,700- to 6,900-pound range, depending on machine configuration and attachment setup.

That size makes the 430 useful for buyers working around barns, shops, construction sites, landscape projects, material yards, acreage, and other environments where a larger loader could be cumbersome.

The skid-steer design also provides excellent maneuverability for repeated loading, cleanup, backfilling, material movement, and fork work.

Seller-Reported Condition

The current seller describes this CASE 430 as being in very good condition and reports that it runs really good.

The machine currently shows approximately 3,980 hours, which is an important consideration for buyers comparing used skid steers in this age and price range.

No major current mechanical problems have been disclosed in the information provided for this listing.

As with any used construction or agricultural equipment, buyers are encouraged to inspect the machine, operate its functions, and verify condition and specifications important to their intended application before purchase.

Practical Applications

This CASE 430 could be a useful fit for a wide range of operators, including:

• Farms and livestock operations
• Excavation contractors
• General contractors
• Landscapers
• Property-maintenance businesses
• Snow-removal operators
• Building contractors
• Material yards
• Rural property owners
• Equipment rental or backup fleets
• Shops and small commercial operations

With the bucket and forks already included, the machine can perform both conventional loader work and pallet/material handling.

Offered at $18,500 in Beach Creek, Pennsylvania

This 2005 CASE 430 skid steer is located in Beach Creek, Pennsylvania and is currently offered at $18,500.

With approximately 3,980 hours, seller-reported very good condition, and both a bucket and pallet forks included, it deserves consideration from buyers looking for a used mid-size CASE skid steer in Pennsylvania or the surrounding region.

Trustworthy Equipment LLC is marketing this unit on behalf of the seller and can help connect qualified buyers with the appropriate party.

Financing assistance may be available to qualified buyers through independent financing providers. Approval, rates, terms, and conditions are determined by the financing provider.

Nationwide transportation assistance may also be available through independent transportation providers.

Contact Trustworthy Equipment LLC for current availability, additional information, or assistance arranging an inspection.