This Brewco 5-head resaw for sale in Reedsville, Wisconsin, is an older heavy-duty horizontal band-resaw system priced at $30,000 OBO. It features five 20 HP electric motors, 36-inch band wheels, 460-volt three-phase power, hydraulic belt feed, variable feed speed, a hydraulic hold-down system, and an included hydraulic power pack.
The seller reports that the machine needs to be rebuilt. It may appeal to sawmills, pallet plants, machinery rebuilders, and lumber-processing businesses looking for a multi-head industrial resaw project. The machine measures approximately 29 feet long, 104 inches wide, and 77 inches high, with an estimated weight of about 14,000 pounds.
Buyers should verify the machine’s present condition, electrical requirements, safety systems, included controls, cutting capacity, and loading arrangements before purchase.
General Specs
-
Seller-Reported Condition
- Older heavy-duty industrial resaw
- Seller reports that the machine needs to be rebuilt
- Present operating condition has not been confirmed
- No recent operating demonstration was reported
Recent Repairs
No specific recent repairs or major component replacements were provided by the seller.
Electrical Information
- Five 20 HP electric motors
- 460-volt electrical system
- Three-phase power
- 60 Hz
- Approximately 1,750 RPM
- Motor starters not included
- Control panel not included
- Electrical disconnect not included
- Emergency-stop system not confirmed or included
- Safety interlocks not included
Hydraulic Equipment
- Hydraulic power pack included
- Approximately 15 GPM pump flow
- Hydraulic feed drive
- Hydraulic hold-down system
- Hydraulic head-spacing adjustment
- Hydraulic operating pressure unknown
- Reservoir size unknown
- Hydraulic motor horsepower unknown
Included Equipment
- Brewco five-head horizontal resaw
- Five 20 HP electric motors
- Five sets of 36-inch band wheels
- Hydraulic power pack
- Hydraulic belt-feed system
- Hydraulic hold-down system
- Variable feed-speed components
- Six blades reportedly included
Known Issues and Disclosures
- Machine needs rebuilding
- Exact year and model are unknown
- Serial number was not provided
- Motor starters are not included
- Main control panel is not included
- No infeed conveyor is included
- No outfeed conveyor is included
- No return system is included
- No operator manual was provided
- Emergency stops are not included or confirmed
- Electrical disconnect is not included
- Safety interlocks are not included
- Complete machine inventory should be verified
The seller has supplied additional measurements and configuration details for this older Brewco five-head resaw. The machine was designed as a heavy-duty horizontal band-resaw system with five individually powered cutting heads.
The seller reports that each head has a 20 HP electric motor and that the machine operates on 460-volt, three-phase power. A hydraulic power pack, hydraulic belt feed, hold-down system, variable feed control, and hydraulic head-spacing adjustment are included in the configuration.
The seller has also disclosed that the machine needs to be rebuilt. No ownership duration, production totals, previous product information, maintenance history, or date of last operation was supplied. The machine is therefore being marketed as an industrial rebuild project rather than a production-ready resaw.
Used Brewco 5-Head Resaw for Sale in Reedsville, Wisconsin
Available in Reedsville, Wisconsin, this used Brewco 5-head resaw for sale is an older, heavy-duty horizontal band-resaw system designed for sawmills, pallet manufacturers, lumber-remanufacturing businesses, and industrial wood-processing operations. The machine is priced at $30,000 OBO and includes five cutting heads, five 20 HP electric motors, 36-inch band wheels, hydraulic belt feed, hydraulic hold-down components, variable feed speed, and a hydraulic power pack.
The seller reports that the machine needs to be rebuilt, making it most appropriate for a buyer with the mechanical ability, facilities, personnel, and resources needed to inspect, repair, install, and place an older production resaw back into service.
Five-Head Production Configuration
This Brewco resaw is configured with five horizontal cutting heads. Each head is powered by an individual 20 HP electric motor, providing approximately 100 combined saw-head horsepower.
The multi-head design allows material to pass through several cutting stations during one production cycle. Depending on blade spacing, material size, feed settings, and the finished product being produced, this configuration may reduce the number of passes required compared with a single-head resaw.
Potential applications include:
- Pallet deck boards
- Pallet stringer material
- Cant breakdown
- Fence boards
- Crating lumber
- Dunnage
- Hardwood and softwood lumber
- Dimensional wood products
- Reclaimed-lumber processing
- Lumber recovery and remanufacturing
The seller reports a maximum cutting width of approximately 7 inches and a maximum cutting height of approximately 14 inches. The minimum board thickness is reported at approximately 7/16 inch, while the maximum board thickness is reported at approximately 6 inches. Buyers should confirm these measurements before purchase because the exact Brewco model and factory specifications have not been supplied.
Heavy-Duty Horizontal Band Resaw
The machine is described as an older, heavy-duty Brewco horizontal band resaw. It is equipped with five sets of 36-inch band wheels.
Additional seller-provided saw-head information includes:
- Five horizontal band-saw heads
- 36-inch band wheels
- Approximately 1½-inch wheel-face width
- Approximately 1¼-inch blade width
- Approximately 15-foot, 6-inch blade length
- Six blades reportedly included
- Air blade-tensioning system
- Sandwich-style blade guides
- Hydraulic head-spacing adjustment
The exact blade thickness, tooth profile, kerf, wheel specifications, and replacement-blade requirements should be verified before ordering blades or replacement components.
Five Individual 20 HP Electric Motors
Each cutting head is powered by its own 20 HP electric motor. This provides dedicated power at each saw station instead of using a single motor to power the complete five-head arrangement.
Seller-reported motor information includes:
- Five electric motors
- 20 HP per cutting head
- Approximately 100 combined HP
- 460-volt electrical system
- Three-phase power
- 60 Hz frequency
- Approximately 1,750 RPM motor speed
Motor starters and a central control panel are not included, according to the information supplied. Buyers should have a qualified industrial electrician inspect the motors, wiring, controls, and electrical requirements before installation.
Hydraulic Belt Feed and Hold-Down System
The Brewco resaw uses a belt-style material-feed system powered hydraulically. The seller also reports that the machine has a hold-down system and variable feed-speed capability.
Reported feed-system features include:
- Belt feed
- Hydraulic feed drive
- Hydraulic hold-down system
- Variable feed speed
- No infeed conveyor included
- No outfeed conveyor included
- No return system included
The feed-speed range and production rate are unknown. Buyers should inspect the condition of the feed belt, drive components, bearings, rollers, hydraulic motors, hold-down system, and adjustment mechanisms.
Hydraulic Power Pack Included
A hydraulic power pack is included with the machine. The seller reports approximately 15 GPM pump flow.
The hydraulic pack may operate the feed system, hold-down equipment, head-spacing adjustments, and other supporting functions. However, the following hydraulic specifications have not been provided:
- Hydraulic motor horsepower
- Operating pressure
- Reservoir capacity
- Pump manufacturer
- Pump model
- Hydraulic fluid capacity
- Control-valve configuration
- Hose condition
The included hoses, fittings, valves, cylinders, and controls should be inventoried and inspected before purchase.
Older Machine That Needs Rebuilding
The seller specifically notes that this Brewco resaw needs to be rebuilt. No recent rebuild, major repair, electrical upgrade, motor replacement, bearing replacement, hydraulic overhaul, or control-system upgrade was reported.
This machine should not be represented as ready to place directly into production. It is being offered as an older industrial resaw suitable for a buyer prepared to inspect and rebuild it as necessary.
Areas that should be evaluated include:
- Band wheels and wheel surfaces
- Wheel bearings and shafts
- Blade guides
- Blade-tensioning equipment
- Saw-head frames
- Electric motors
- Feed belt and drive components
- Hydraulic pump and reservoir
- Hydraulic motors and cylinders
- Head-spacing mechanisms
- Structural welds
- Guards and guarding mounts
- Electrical wiring
- Motor starters
- Operator controls
- Emergency-stop system
- Safety interlocks
- Included loose parts
Size and Transportation Information
The seller reports the following approximate measurements:
- Overall length: 29 feet
- Overall width: 104 inches
- Overall height: 77 inches
- Estimated weight: approximately 14,000 pounds
- Shipping sections: one
The machine is located in Reedsville, Wisconsin. The seller indicates that it is intended to remain in one section for removal. Buyers should independently confirm the loading plan, rigging requirements, access conditions, trailer requirements, and whether any loading equipment or assistance is available.
Price and Buyer Information
The asking price is $30,000 OBO, and the seller is open to reasonable offers.
This machine may be best suited for:
- Established sawmills
- Pallet plants
- Lumber-remanufacturing operations
- Industrial wood-products businesses
- Machinery rebuilders
- Buyers building a custom processing line
- Companies seeking a multi-head resaw project
Trustworthy Equipment LLC is marketing this Brewco resaw on behalf of the seller. Buyers are encouraged to inspect the machine, verify all specifications, and confirm exactly what is included before purchase.
Contact Trustworthy Equipment LLC for current availability, additional photographs, seller coordination, or help exploring transportation and financing options.
Specifications are believed to be accurate but are not guaranteed and may vary by unit. Buyers should independently verify all specifications, features, and condition prior to purchase.
The following specifications combine seller-provided measurements and configuration details from the supplied equipment sheets. The exact Brewco model, production year, factory cutting capacity, and original configuration have not been confirmed. Buyers should independently verify all specifications important to their purchase.
General Information
- Manufacturer: Brewco
- Model: Not provided
- Year: Not provided
- Equipment Type: Five-head horizontal band resaw
- Number of Saw Heads: Five
- Condition: Used; seller reports it needs rebuilding
- Price: $30,000 OBO
- Location: Reedsville, Wisconsin
- Serial Number: Not provided
- Primary Application: Sawmill and pallet-lumber processing
Saw-Head Configuration
- Saw Heads: Five
- Band-Wheel Diameter: 36 inches
- Wheel-Face Width: Approximately 1½ inches
- Blade Width: Approximately 1¼ inches
- Blade Length: Approximately 15 feet, 6 inches
- Blade Thickness: Not provided
- Blades Included: Six reportedly included
- Blade Tensioning: Air
- Blade Guides: Sandwich-style
- Head-Spacing Adjustment: Hydraulic
Electric Motors
- Motor Type: Electric
- Motor Quantity: Five
- Motor Power: 20 HP per head
- Combined Saw-Head Power: Approximately 100 HP
- Voltage: 460 volts
- Phase: Three-phase
- Frequency: 60 Hz
- Motor Speed: Approximately 1,750 RPM
- Motor Starters: Not included
- Control Panel: Not included
- Electrical Disconnect: Not included
Cutting and Production
- Maximum Cutting Width: Approximately 7 inches
- Maximum Cutting Height: Approximately 14 inches
- Minimum Board Thickness: Approximately 7/16 inch
- Maximum Board Thickness: Approximately 6 inches
- Feed-Speed Range: Unknown
- Production Capacity: Unknown
- Number of Cutting Heads: Five
- Potential Cuts per Pass: Configuration dependent
- Common Applications: Pallet stock, boards, cant breakdown, fencing, crating lumber, dunnage, and dimensional lumber
Feed and Hold-Down System
- Feed-System Type: Belt
- Feed Drive: Hydraulic
- Infeed Conveyor: Not included
- Outfeed Conveyor: Not included
- Hold-Down System: Included
- Variable Feed Speed: Yes
- Return System: Not included
Hydraulic System
- Hydraulic Power Pack: Included
- Pump Flow: Approximately 15 GPM
- Hydraulic Motor Horsepower: Unknown
- Operating Pressure: Unknown
- Reservoir Capacity: Unknown
- Head Adjustment: Hydraulic
- Feed Drive: Hydraulic
- Hold-Down System: Hydraulic
- Hoses and Fittings: Included components should be verified
Dimensions and Weight
- Overall Length: Approximately 29 feet
- Overall Width: Approximately 104 inches
- Overall Height: Approximately 77 inches
- Estimated Weight: Approximately 14,000 pounds
- Shipping Sections: One
- Foundation Requirements: Not provided
Safety and Controls
- Emergency Stops: No or not included
- Blade Guards: Yes, completeness should be verified
- Electrical Disconnect: No
- Operator Controls: Not included or not confirmed
- Safety Interlocks: No
- Operator Manual: No
Included Equipment
- Brewco five-head resaw
- Five 20 HP electric motors
- Five sets of 36-inch band wheels
- Hydraulic power pack
- Hydraulic belt-feed system
- Hydraulic hold-down components
- Variable feed components
- Six blades, seller-reported
Available in Reedsville, Wisconsin, this used Brewco 5-head horizontal band resaw is offered at $30,000 OBO. The system includes five saw heads, five 20 HP electric motors, 36-inch wheels, hydraulic belt feed, hydraulic hold-down equipment, variable feed speed, hydraulic head adjustment, and a hydraulic power pack rated at approximately 15 GPM.
The seller reports that the resaw needs to be rebuilt, making it a potential project for an established sawmill, pallet manufacturer, industrial wood-products company, equipment rebuilder, or buyer with the facilities and personnel necessary to restore an older production machine.
Seller-reported cutting capacity includes approximately 7 inches of maximum cutting width, 14 inches of maximum cutting height, a minimum board thickness near 7/16 inch, and a maximum board thickness near 6 inches. The machine uses approximately 1¼-inch-wide blades measuring around 15 feet, 6 inches long, and six blades are reportedly included.
The resaw operates on 460-volt, three-phase, 60 Hz electrical power. Motor starters, a main control panel, electrical disconnects, infeed and outfeed conveyors, and a return system are not included.
Nationwide transportation assistance may be available through an independent provider once loading access, dimensions, weight, and trailer requirements are verified. Financing assistance may be available to qualified buyers through independent financing companies.
Explore Similar Equipment
SOLD
