This John Deere 748 grapple skidder for sale in Rockville, Indiana has just been reduced from $30,000 to $27,999 OBO. Built for timber handling and logging applications, this used John Deere forestry machine includes a seller-reported remanufactured engine and rear grapple configuration. Buyers searching for a used logging skidder, forestry skidder, or John Deere grapple skidder in Indiana and the Midwest may want to consider this reduced-price machine. Exact year, hours, series, tire condition, and additional mechanical details should be verified before purchase. Reasonable offers are being considered, and nationwide transportation and financing assistance may be available through independent providers.
General Specs
Replaced Components
- Seller reports a remanufactured engine.
- Engine installation date was not provided.
- Hours accumulated since installation were not provided.
- Remanufacturer information was not provided.
- Engine invoices or supporting documentation were not provided.
- Warranty status was not provided.
Maintenance
- No detailed routine maintenance history was supplied.
- No recent transmission service was reported.
- No recent hydraulic-system service was reported.
- No recent axle or final-drive service was reported.
- No tire replacement information was provided.
- No grapple pin, bushing, cylinder, or boom repairs were reported.
Known Issues or Disclosures
- Exact year has not been confirmed.
- Exact 748 series has not been confirmed.
- Total machine hours have not been provided.
- Tire condition has not been provided.
- Complete mechanical condition has not been supplied.
- Documentation for the remanufactured engine has not been provided.
- Buyers should independently inspect and verify all major systems.
The seller has provided limited ownership and operating-history information for this John Deere 748 grapple skidder.
Based on the available information, the machine is being offered as an older used forestry skidder equipped with a seller-reported remanufactured engine.
The seller has not stated:
- Length of ownership
- Primary type of logging work
- Total machine hours
- Hours on the remanufactured engine
- Whether it served as a primary or backup skidder
- Storage history
- Complete maintenance history
- Reason for selling
The seller has, however, reduced the asking price from $30,000 to $27,999 OBO, indicating that reasonable offers may be considered.
Available now in Rockville, Indiana, this John Deere 748 grapple skidder for sale has been price reduced from $30,000 to $27,999 OBO. Equipped with a seller-reported remanufactured engine, this used forestry machine may be a practical option for logging contractors, timber operations, land-clearing companies, sawmills, and forestry businesses looking for an older production skidder at a lower asking price.
The $2,001 price reduction gives serious buyers another reason to take a closer look. The seller is also open to reasonable offers.
Price Reduced to $27,999 OBO
Originally offered at $30,000, this John Deere 748 skidder is now priced at $27,999 or best offer.
For buyers comparing used grapple skidders and logging equipment, the combination of the reduced asking price and seller-reported remanufactured engine may make this machine worth investigating.
The exact year, model series, operating hours, tire condition, and complete mechanical history have not yet been supplied. Buyers should confirm the serial number and identification plate to determine whether this is a 748G, 748G Series II, 748G Series III, 748H, or another John Deere 748 configuration.
Seller-Reported Remanufactured Engine
One of the most important reported features is the remanufactured engine.
Engine replacement can represent a major expense on older forestry equipment, so the presence of a remanufactured engine may be important to prospective buyers. However, the seller has not provided:
- Engine manufacturer or model
- Installation date
- Hours since installation
- Remanufacturer information
- Service invoices
- Warranty information
- Supporting engine documentation
Interested buyers should request these details and independently inspect the engine.
The engine is being described specifically as remanufactured based on seller-provided information. It should not be considered new or fully rebuilt unless supporting documentation confirms otherwise.
Built for Logging and Timber Handling
The John Deere 748 family was designed for demanding forestry applications where maneuverability, traction, hydraulic grapple operation, and timber-handling capability are important.
A grapple skidder allows an operator to gather felled timber hydraulically and transport logs from the cutting area toward a landing or processing location.
Depending on its exact configuration and present mechanical condition, this skidder may be suitable for:
- Commercial logging
- Timber harvesting
- Sawmill support
- Land clearing
- Storm cleanup
- Woodland management
- Log handling
- Moving timber to landings
- Firewood operations
- Lumber-production support
Rear Grapple Configuration
The seller identifies this machine as a 748 grapple skidder, indicating a rear hydraulic forestry grapple designed for gathering and carrying logs.
Exact information regarding the grapple has not been supplied, including:
- Maximum grapple opening
- Grapple capacity
- Single-function or dual-function configuration
- Pins and bushings
- Boom condition
- Hydraulic cylinder condition
- Grapple rotation
- Hydraulic leaks
Buyers should inspect the grapple assembly under operation and check the boom structure, cylinders, hoses, pins, bushings, and associated hydraulic components.
Four-Wheel-Drive Articulated Forestry Design
John Deere 748 machines are associated with articulated four-wheel-drive forestry configurations designed for maneuverability in wooded terrain.
Actual performance will depend heavily on the condition of this particular machine, including its tires, axles, drivetrain, transmission, articulation components, hydraulics, and grapple system.
No current tire percentage or drivetrain-condition information has been provided.
Condition and Buyer Inspection
Beyond the seller-reported remanufactured engine, detailed mechanical-condition information has not been supplied.
Prospective buyers should inspect or have the skidder inspected before purchase. Important areas to evaluate include:
- Cold-start performance
- Engine operation
- Transmission engagement
- Forward and reverse operation
- Articulation joint
- Steering
- Brakes
- Front blade operation, if equipped
- Grapple operation
- Hydraulic pressure and response
- Hydraulic leaks
- Center pins and bushings
- Axles and final drives
- Driveline components
- Tire condition
- Cab and controls
- Structural components
For older logging equipment, an operating inspection can provide considerably more information than photographs alone.
Reduced Price Creates a Stronger Opportunity
At the new asking price of $27,999 OBO, this John Deere grapple skidder is now more aggressively positioned for buyers searching for affordable forestry equipment.
The seller has reduced the price by $2,001 and remains open to reasonable offers.
Final value should be based on the exact model series, serial number, hours, documentation for the remanufactured engine, tires, hydraulics, transmission, grapple condition, center section, and overall operating condition.
Financing, Transportation, and Buyer Assistance
Financing assistance may be available to qualified buyers through independent financing providers. Approval, down payment, interest rate, and loan terms are determined solely by the financing provider.
Nationwide transportation assistance may also be available through independent equipment-transport companies. Shipping costs will depend on verified dimensions, operating weight, pickup conditions, destination, permit requirements, and transport configuration.
Trustworthy Equipment LLC is marketing this unit on behalf of the seller and can help connect qualified buyers with the appropriate party.
Contact Trustworthy Equipment LLC for current availability, additional information, inspection arrangements, financing assistance, or transportation coordination.
Specifications are believed to be accurate but are not guaranteed and may vary by unit. Buyers should independently verify all specifications, features, and condition prior to purchase.
The following specifications combine seller-provided information with identification commonly associated with the John Deere 748 model family. Equipment can vary considerably by serial number, production year, series, options, attachments, and configuration. Buyers should independently verify all specifications important to their purchase.
General Information
- Manufacturer: John Deere
- Model: 748
- Exact Series: Not provided
- Year: Not provided
- Equipment Type: Grapple skidder
- Category: Forestry and logging equipment
- Price: $27,999 OBO
- Previous Price: $30,000
- Price Reduction: $2,001
- Location: Rockville, Indiana
- Hours: Not provided
- Serial Number: Not provided
- Seller Type: Unknown
- Current Operating Condition: Not specifically provided
Engine
- Fuel Type: Diesel, subject to confirmation
- Engine Condition: Seller reports remanufactured engine
- Engine Manufacturer: Not provided
- Engine Model: Not provided
- Displacement: Requires exact-series verification
- Horsepower: Requires exact-series verification
- Cylinders: Requires exact-series verification
- Aspiration: Requires exact-series verification
- Cooling System: Requires verification
- Hours Since Remanufacture: Not provided
- Engine Warranty: Not provided
- Engine Documentation: Not provided
Transmission and Drive
- Drive Configuration: Four-wheel-drive articulated forestry configuration, subject to verification
- Transmission Type: Requires exact-series verification
- Forward/Reverse Speeds: Requires exact-series verification
- Differential: Requires verification
- Final Drives: Requires verification
- Travel Speed: Requires exact-series verification
Grapple and Boom
- Attachment: Rear forestry grapple
- Grapple Configuration: Not provided
- Grapple Capacity: Requires verification
- Maximum Grapple Opening: Not provided
- Boom Condition: Not provided
- Pins and Bushings: Not provided
- Grapple Rotation: Requires verification
- Hydraulic Cylinder Condition: Not provided
Hydraulics
- Hydraulic Pump: Requires exact-series verification
- Hydraulic Flow: Requires exact-series verification
- Hydraulic Pressure: Requires exact-series verification
- Known Hydraulic Leaks: Not provided
- Recent Hydraulic Service: Not provided
Blade and Winch
- Front Blade: Requires confirmation
- Blade Width: Requires exact-series verification
- Blade Condition: Not provided
- Winch: Not provided
Dimensions and Weight
- Operating Weight: Requires exact-series/configuration verification
- Overall Length: Requires verification
- Overall Width: Requires tire/configuration verification
- Overall Height: Requires verification
- Wheelbase: Requires verification
- Ground Clearance: Requires verification
- Transport Dimensions: Must be confirmed before transportation
Tires and Axles
- Tire Size: Not provided
- Tire Condition: Not provided
- Chains: Not provided
- Front Axle Condition: Not provided
- Rear Axle Condition: Not provided
- Wheel Guards: Not provided
- Center Articulation Condition: Not provided
Cab and Operator Features
- Cab Configuration: Requires confirmation
- Heat: Not provided
- Air Conditioning: Not provided
- Seat Condition: Not provided
- Controls: Not provided
- Lighting: Not provided
- Glass Condition: Not provided
- ROPS/FOPS Protection: Requires verification
Included Equipment
- Seller-confirmed rear forestry grapple
- Seller-reported remanufactured engine
- Additional equipment or accessories not provided
Buyers searching for a John Deere 748 grapple skidder for sale now have a lower-priced option available in Rockville, Indiana. Previously offered at $30,000, this used logging skidder has been reduced to $27,999 OBO.
The John Deere 748 designation is associated with heavy-duty articulated forestry skidders built for timber harvesting and log-handling applications. This particular machine includes a seller-confirmed rear grapple and a seller-reported remanufactured engine.
Because the exact year and series have not been supplied, buyers should verify the machine identification before relying on model-specific horsepower, weight, dimensions, transmission, hydraulic, or grapple specifications.
For logging companies, sawmills, land-clearing contractors, timber operations, and buyers searching for used forestry equipment in Indiana or the Midwest, the reduced asking price may make this machine worth a closer inspection.
Trustworthy Equipment LLC can assist qualified buyers with connecting to the seller. Independent financing and nationwide transportation assistance may also be available.
Explore Similar Equipment
