Trustworthy Equipment LLC
Manitou MLT 630-105 V CP Telehandler
- Stock number
- AM061
- Status
- Available
- Location
- Irvington, Kentucky
- Asking price
- $95,000
- Model
- MLT 630-105 V CP

Overview & condition
The Manitou MLT 630-105 V CP telehandler is listed at $95,000 in Irvington, Kentucky. The seller will consider reasonable offers. This used telehandler is stock AM061. The seller reports an enclosed cab, boom suspension, working LED lights, a Deutz diesel engine and a skid-steer quick-attach adapter. The photos show the actual machine from the side and rear.
Manitou MLT 630-105 V CP lift and reach
Manitou lists a 6,600 lb maximum lift capacity, a 19 ft 8 in maximum lift height and 11 ft 3 in maximum forward reach for this model. These figures describe different limits. If you’re comparing it with a forklift or a larger telehandler, bring the weight, length and placement height of the load you need to handle. Check the load chart on the machine for the attachment, load center and boom position you plan to use.
The V CP is an agricultural telehandler. Buyers looking for a machine for pallet handling, feed or bale work can use the published height and reach to screen out machines that are too small for the job, then confirm the specific attachment and capacity before deciding. The seller reports boom suspension, which is worth checking during a demonstration if you expect to travel regularly between buildings or work areas.
Deutz engine, transmission and hydraulics
The seller reports 105 hp. Manitou’s North American factory sheet rates the four-cylinder Deutz TCD 3.6 L diesel at 101 hp and lists 302 lb-ft of torque at 1,600 rpm. It specifies Tier 4 Final emissions, a two-range M-Varioshift hydrostatic transmission and a factory maximum travel speed of about 24 mph. Confirm the engine data plate for the rating of this particular unit.
The published hydraulic pump rating is 27.5 gpm at 3,626 psi. For a powered attachment, ask separately about available flow and pressure at the coupler, the fittings and how the attachment controls connect. If you plan to use equipment you already own, bring the attachment’s make and model so fit can be checked against the reported skid-steer quick-attach adapter.
Manitou MLT 630-105 V CP dimensions and cab
Manitou lists the V CP at 14,903 lb unladen with forks, 15 ft 8 in long to the carriage with hitch, 6 ft 9 in wide and 7 ft high. The same sheet lists 11 inches of ground clearance and 400/70 R20 standard tires. Ask for the dimensions and weight of the machine as equipped before scheduling a trailer. The installed tires and whatever is attached to the carriage can affect measurements or transport weight.
For an enclosed cab telehandler that will work indoors and out, measure the narrowest doorway on the route, including overhead clearance, before arranging a visit. During a walkaround, check the cab glass, work lights and visibility from the seat. Ask which attachments come with the machine and whether there are maintenance records available. A photo of the hour meter, serial plate and load chart can help identify the exact configuration before you travel.
What the factory ratings tell you
When comparing the Manitou MLT 630-105 V CP with a machine listed at a similar price, ask for both model numbers and capacity plates so you can compare the same measurements. For a farm with several buildings, note where you need vertical clearance and where you need forward reach. That gives you a practical way to decide whether to schedule a demonstration of AM061.
Ask about AM061 in Irvington, Kentucky
Contact Trustworthy Equipment for pricing questions, availability and a viewing. Have the stock number and a short description of the work you need the machine to do. If you are comparing this Kentucky telehandler with other lifts, browse more used equipment and review the Manitou North American V CP technical sheet for the factory dimensions and load chart.