---
title: "2009 New Holland T6020 2WD Cab Tractor"
url: "https://trustworthyequipment.com/equipment-listings/new-holland-t6020/"
type: "equipment-listings"
published: "2026-11-20T20:39:32-05:00"
modified: "2026-11-21T14:42:11-05:00"
author: "Andrew Menard"
---

This **2009 New Holland T6020** is a two-wheel-drive cab tractor offered at **$30,000** in the Fredericksburg, Ohio area. Ask for stock ES212A. The seller reports about 1,800 hours on the working meter. He recently checked a prior photo and confirmed that the reading had advanced. Total tractor hours remain unverified.

## New Holland T6020 condition and recent service

The seller has owned the tractor for about a year and says it appears mechanically sound. During that time, he replaced a transmission component and changed the transmission fluid and filters. The specific replacement part is unknown. The seller reports that the engine oil and filter were changed on November 21, 2026. Earlier service and ownership records are limited.

Expect substantial exterior and cab wear. The seller reports loose rear fenders. The photos show worn seat upholstery and scuffed exterior panels. He also reports a small engine oil leak where the top cover meets the cylinder head and says it has not left a puddle. The gallery shows the actual tractor from both sides, the rear hitch area, the cab interior and controls, the instrument panel, and the factory identification plate.

## Factory power and transport specifications

New Holland lists the T6020 with a 4.5 L four-cylinder turbocharged and intercooled diesel. The factory ratings are **110 gross engine horsepower** and **90 rated PTO horsepower**, with a rated engine speed of 2,200 rpm. These figures describe the model. They are factory ratings, and actual power on this tractor has not been measured.

The New Holland brochure lists a 93.3-inch wheelbase for the 2WD Delta and Plus configurations. The published shipping weight is approximately 10,000 lb for the Delta 2WD cab and 10,008 lb for the Plus 2WD cab. Height to the top of the cab is listed at 109.2 inches for Delta and 112.4 inches for Plus. Confirm actual loaded weight and overall clearance for transport. Tires, ballast, fuel and equipment can affect those measurements.

## Rear linkage, hydraulics and PTO

The photos show a rear three-point linkage, a rear PTO, and three pairs of hydraulic couplers. The tractor is shown without an installed front loader. The factory brochure lists a Category II three-point hitch for the Delta and Plus. The Delta reference lists open-center hydraulics, 16.6 gpm of implement flow and 7,509 lb of standard rear hitch lift. Exact trim, installed pump, hitch lift options and PTO speed options still need confirmation. Compare the tractor’s actual connections and ratings with the requirements of the implement you plan to use.

## Identification and buyer inspection

The factory plate identifies model T6020, tractor PIN **Z9BD01934**, engine serial 000644761 and driveline serial 0009075942. It is marked Made in England. The supplied PIN interpretation points to 2009. See the [New Holland T6000 factory brochure](https://users.xecu.net/cnh/t6000/T6000_brochure.pdf) for trim differences and reference specifications.

If you’re comparing a used New Holland tractor for hay or general farm work, ask to see the engine start, the meter advance, and the transmission and PTO operate. Look at the loose fenders and the reported oil seep before making an offer. Check the cab heat and air-conditioning controls in person because their operation is unverified. The cab and two-wheel-drive layout are shown in the actual photos.

Contact Trustworthy Equipment for inspection and pickup arrangements and give the stock number ES212A. If you need more context before deciding, use the rear photos to compare the hitch and coupler arrangement with your own equipment or [browse other used tractors for sale](https://trustworthyequipment.com/equipment-category/tractors/).

For a New Holland T6020 for sale with a 2WD cab, the rear photographs are especially useful if you plan to run more than one hydraulic function. Count the coupler pairs and compare the hose connections with your implement. The cab photographs show the seat and control layout so you can judge the visible wear before arranging a trip.
