A buyer looking for a John Deere 650G LGP dozer with a winch can inspect this 1998 machine in Monterey, Virginia. Benjamin Mast is asking $45,000 for the dozer and winch together. He reports 7,600 hours, several new rollers and sprockets, and track pads in great condition. His estimate of 65% undercarriage life remaining gives buyers a starting point for comparing the tractor with other used machines. A close look at both track assemblies will tell you more about its fit for your own work. The image shown is a labeled stock illustration. Contact Trustworthy Equipment to request current photographs or arrange to see Ben’s machine.
General Specs
Ben reports several new rollers and sprockets. Ask which rollers were changed on each side and whether receipts or undercarriage measurements are available.
Benjamin Mast is offering his 1998 John Deere 650G LGP in Monterey, Virginia. Ben identifies the tracks as one of the machine’s strengths. He describes the track pads as being in great condition and estimates about 65% remaining life in the undercarriage. The dozer shows a reported 7,600 hours and the $45,000 asking price includes the winch.
1998 John Deere 650G LGP dozer for sale in Monterey, Virginia
Benjamin Mast is asking $45,000 for this John Deere 650G LGP crawler dozer with its winch. Ben reports 7,600 hours. If you are comparing used crawlers, the most useful details in his description concern the tracks: he estimates that the undercarriage has about 65% of its life remaining, describes the pads as being in great condition, and reports several new rollers and sprockets. The machine is available to view by arrangement in Monterey, Virginia. Use stock number ES268 when requesting current pictures or setting up a visit.
What the undercarriage estimate covers
Ben’s 65% figure is his estimate for the undercarriage as a whole. The seller did not give separate wear measurements for the left and right chains, pins, bushings, idlers or individual rollers. That distinction matters on a used dozer. A replacement roller and an older track chain can be on the same side of the same machine. The replacement tells you that work has been done at that position. You still need to examine the other components to understand what the next owner may need to budget for.
If you are arranging an inspection from out of town, request a full side view of each track assembly first. Follow that with closer pictures of the sprocket teeth, the track pads and the rollers Ben has replaced. A photo taken from directly beside the machine is usually more useful for this comparison than an angled front view. Ask if Ben has a shop measurement sheet or receipts that identify which parts were installed. Those records, if available, can help you decide what you want to look at first when you see the machine in person.
Low ground pressure configuration
LGP identifies the low ground pressure configuration. Buyers looking at a crawler for softer ground will want to compare the shoe width and the length of track in contact with the ground with the requirements of their site. Ben has identified his machine as an LGP, but has not supplied a shoe measurement. If clearance through a gate, a particular finished grade, or haul width determines whether the machine will work for you, ask for a tape measurement across the actual shoes and blade. A model designation alone will not give you those dimensions with certainty.
Ground conditions also change how a machine can be used. A broad footprint can be desirable on a soft surface, while rock, roots, slopes and confined turns place different demands on the tracks and operator. Tell Ben what your intended job involves. The most relevant comparison is between the actual tractor you can inspect and the ground where you expect to work. Buyers with a narrow access road should include the widest part of the blade and any rear equipment when checking their route.
Winch included in the asking price
The winch is included in the $45,000 asking price. Buyers planning to use it for a particular job should request a picture of its identification plate, the drum, the line and the rear mounting arrangement. The seller has not supplied a winch make, line-pull rating or cable length. A clear photograph of the plate gives you a way to identify the correct operating instructions, service information and replacement parts before buying. The machine’s engine horsepower is a separate figure and cannot tell you the winch rating.
When arranging a viewing, ask Ben whether he can demonstrate the controls and explain how he has used the winch. Confirm which accessories, if any, will go with the dozer. If your hauling arrangement depends on the rear overhang, measure from the back of the winch to the foremost part of the blade in the intended transport position. A transport company will also need an actual or documented configured weight before selecting a trailer. The listing does not give a transport weight for this particular combination.
Hours and service questions
The reported hour reading is 7,600. A useful next step is a current meter photo and a discussion of the service Ben can document. Ask whether there are records for the undercarriage work and whether he has dates or meter readings for the replacement parts. The work mentioned in this listing is specific to rollers and sprockets. No engine overhaul, transmission rebuild or complete undercarriage replacement is included in the seller’s description.
For a buyer comparing several used crawlers, bring the same short list of questions to each inspection. Record the identification number, meter reading, track measurements and which parts the seller says were changed. Look at both sides and make a separate note of anything you would want a mechanic to assess. If the machine will be used with other equipment already on your property, bring your clearance and transport measurements too. This makes it easier to compare the total cost of putting each machine to work after the visit.
Viewing the dozer and requesting actual photos
The displayed image is labeled STOCK PHOTO and is an AI-generated representation. Use actual photographs from Ben or an in-person visit to confirm the cab arrangement, paint, blade, controls, winch and visible condition. For the first request, the most informative set would include both track assemblies, the rear of the machine, a clear side view of the blade and an operator-station view showing the hour meter. If one detail matters most for your planned work, mention it when asking for pictures.
Trustworthy Equipment can connect interested buyers with Benjamin Mast to discuss this dozer and arrange a viewing in Monterey. The seller handles the equipment sale directly. Reference ES268, the 1998 John Deere 650G LGP with winch, so the inquiry reaches the correct listing. Confirm availability with the seller before traveling or booking transport.
Specifications are believed to be accurate but are not guaranteed and may vary by unit. Buyers should independently verify all specifications, features, and condition prior to purchase.
Ben’s dozer: 1998 John Deere 650G LGP, 7,600 reported hours, winch included. Asking $45,000 in Monterey, Virginia.
Factory specifications for comparison
Confirm the transmission, shoe width and installed equipment with Ben. Deere lists the following figures for the 650G LGP. Actual measurements and weight will vary with configuration.
- Engine: John Deere 4045T turbocharged four-cylinder, 276 cu. in., rated at 90 SAE net hp at 2,100 rpm.
- Tracks: With 24-inch shoes, ground contact area is 4,109 sq. in. and width across the tracks is 93 inches. The LGP undercarriage has 38 shoes per side. Deere also lists a 26-inch shoe option.
- Torque-converter version: 19,322 lb operating weight with standard equipment. Ground pressure with 24-inch shoes is 4.70 psi.
- Direct-drive version: 19,122 lb operating weight with standard equipment. Ground pressure with 24-inch shoes is 4.65 psi.
- Hydraulics: Open-center system with a gear pump rated at 17 US gpm at 2,100 rpm. Main relief pressure is 2,750 psi.
Confirm the actual weight with Ben’s winch and blade installed before arranging transport. John Deere G-Series specifications · RitchieSpecs torque-converter reference.
Planning a visit to Monterey
When you contact Trustworthy Equipment about stock ES268, tell us whether you are interested in grading, working on softer ground or using the winch. That gives Ben a chance to address the questions most relevant to the way you plan to use the dozer. Buyers who will need delivery can ask for measurements and pickup arrangements before requesting a freight quote. The equipment stays with its owner in Monterey, Virginia, and the buyer and seller can discuss the details of the sale directly.
For a model reference, John Deere published a G-Series crawler dozer brochure. Read the 650G column when comparing specifications. Several tractors appear side by side in that publication, and the specifications for a 450G or 550G do not describe this model. The source distinguishes different drivetrains, which is especially important for anyone ordering parts. Check the serial plate and fitted components before relying on a particular specification.
To arrange a viewing or ask for pictures of Ben’s machine, use the Call Now or Make Offer option on this listing. Mention the $45,000 John Deere crawler with the winch so your inquiry reaches the right seller.
Explore Similar Equipment
