Description :

Available in Charlotte, Michigan, for $18,000, this 1985 GMC C7000 for sale is a one-owner, medium-duty grain truck equipped with a 427-cubic-inch L43 V8 gasoline engine, 5-speed manual transmission, 2-speed rear axle, and 300-bushel grain bed. The seller reports just 21,938 actual miles and describes the truck as being in excellent condition.

With a reported 32,200-pound gross vehicle weight rating (GVWR), this GMC was configured for agricultural hauling rather than ordinary pickup-truck duties. Its conventional cab, tilt hood, and grain-hauling body make it a practical candidate for farmers and agricultural operations looking for a traditional farm grain truck.

The one-owner history is particularly noteworthy. Buyers searching for an older GMC grain truck with low reported mileage may appreciate the opportunity to inspect a truck that has reportedly remained with its original owner.

1985 GMC C7000 for Sale — 427 V8 Grain Truck

The GMC C7000 belongs to General Motors' established medium-duty commercial truck lineup, designed for applications requiring substantially more load-carrying capability than conventional light-duty pickups.

The C7000 platform was available in a range of commercial configurations, including agricultural bodies, flatbeds, service bodies, and other specialized equipment installations.

This particular truck is configured with a grain bed advertised as holding approximately 300 bushels, making it relevant to farms hauling harvested crops between fields, grain-handling facilities, and storage locations.

Unlike a modern highway tractor or semi-trailer combination, this conventional medium-duty truck provides a self-contained grain-hauling configuration.

Its usefulness will depend on the buyer's intended hauling distances, road conditions, loading procedures, and applicable weight restrictions.

GMC L43 427 V8 Gasoline Engine

Power comes from the seller-identified L43 427-cubic-inch engine, a 7.0-liter V8 from General Motors' commercial-duty engine family.

The 427 industrial and medium-duty truck engine was developed for demanding commercial applications where pulling power and operation under load were important considerations.

Unlike smaller automotive V8 engines, the commercial-duty 427 was intended for heavier truck applications, including agricultural and industrial service.

Published historical information identifies the L43 designation with GM's 427-cubic-inch tall-deck V8 engine family. The engine is associated with medium-duty applications such as the C7000.

Buyers can explore additional technical information through GM 366/427 commercial engine reference and the General Motors Heritage Archive.

The engine's actual mechanical condition, maintenance history, compression, and operating characteristics should be confirmed during inspection.

5-Speed Manual Transmission and 2-Speed Rear Axle

One of the important features of this used GMC C7000 grain truck is its traditional medium-duty drivetrain.

The truck is equipped with:

• 5-speed manual transmission

• 2-speed rear axle

• 427-cubic-inch gasoline V8

• Conventional medium-duty truck chassis

The 2-speed rear axle provides a choice between different final-drive ratios, allowing the operator to select gearing appropriate to road speed, hills, and loaded conditions.

This arrangement was commonly used in agricultural and commercial trucks that needed flexibility between field-related hauling and highway travel.

For operators familiar with older farm trucks, the combination of a manual gearbox and 2-speed rear axle offers a traditional driving configuration without the electronically controlled shifting systems found in many newer commercial vehicles.

Prospective buyers should verify proper transmission engagement, clutch operation, rear-axle shifting, and drivetrain condition during an inspection and road test.

300-Bushel Grain Bed

The truck is equipped with a grain body advertised as having a 300-bushel capacity.

This makes it worth considering for agricultural operations transporting:

• Shelled corn

• Soybeans

• Wheat

• Oats and other small grains

• Harvested crops between farm locations and grain facilities

The grain bed is among this truck's most important features because it gives the buyer an agricultural hauling body without the need to separately purchase and install one.

The photograph shows a tall-sided grain body mounted behind the conventional cab.

Importantly, the 300-bushel figure describes the advertised grain-bed volume. It does not establish the truck's legal payload. Actual permissible loading depends on empty vehicle weight, grain density, axle ratings, tire ratings, and applicable road limits.

Buyers should also verify the bed-floor condition, tailgate and grain-door operation, frame integrity, and unloading or hoist equipment, as the advertisement does not detail these components.

32,200-Pound GVWR Medium-Duty Chassis

The seller advertises a 32,200-pound gross vehicle weight rating.

GVWR represents the maximum manufacturer-rated weight of the fully loaded truck, including the vehicle itself, its occupants, fuel, and cargo.

For agricultural users, this rating is important when evaluating whether a grain truck is appropriately sized for their hauling requirements.

A 32,200-pound GVWR should not be confused with a 32,200-pound cargo capacity.

Buyers should verify the manufacturer's vehicle identification and weight-rating plate and determine the truck's actual empty weight before calculating permissible grain loads.

Commercial licensing, registration, inspection, and agricultural exemptions may vary according to how and where the truck is operated.

Tilt Hood for Engine Access

Another useful feature identified in the advertisement is the truck's tilt hood.

This configuration provides access to the engine compartment for routine inspections, service, and mechanical repairs.

For farms that maintain their own equipment, accessible engine components can be an important consideration, particularly on older gasoline-powered commercial trucks.

The truck's traditional design may appeal to operators already familiar with GMC and Chevrolet medium-duty equipment of this era.

Replacement component compatibility should always be verified using the truck's VIN, engine identification, and actual installed equipment.

One-Owner History and Low Reported Mileage

The seller advertises this truck as a one-owner vehicle with 21,938 actual miles.

That ownership history is a significant consideration for buyers evaluating vintage GMC farm trucks.

Rather than being advertised as a truck that has passed through numerous owners, this C7000 is represented as having remained with one owner.

The seller also describes its overall condition as excellent.

These are seller-reported details rather than independently verified inspection findings. Buyers should review any available ownership records, service documentation, odometer information, and mechanical condition to evaluate the truck's history.

The combination of low reported mileage, one-owner background, and a grain-hauling configuration makes this truck worth a closer look for buyers who prefer older, conventional medium-duty equipment.

Agricultural Uses and Buyer Considerations

This 1985 GMC grain truck may be suitable for several farming applications, depending on its current mechanical condition and the buyer's requirements.

Potential uses include moving grain from harvest fields to storage, transporting agricultural commodities between local facilities, and providing an additional hauling vehicle during seasonal harvest operations.

Farmers looking for a 300 bushel grain truck may find this configuration especially relevant when a smaller farm truck fits their operation better than a semi-trailer combination.

For buyers searching for a grain truck for sale in Michigan, the location in Charlotte provides an opportunity to arrange an in-person inspection in south-central Michigan.

The truck may also interest buyers in Indiana, Ohio, and other Midwestern agricultural markets.

Additional trucks and transportation equipment can be explored through Trustworthy Equipment's Trucks & Trailers inventory.

Asking $18,000 — Charlotte, Michigan

This GMC C7000 is offered for $18,000.

Its major advertised features include the 427 V8 engine, 5-speed transmission, 2-speed rear axle, 300-bushel grain bed, tilt hood, one-owner history, and 21,938 reported actual miles.

For serious buyers, the next step is to review additional photographs, verify the mechanical and structural condition, and arrange an inspection.

The seller has indicated that additional photographs are available upon request.

Seller Contact: Wayne

Phone: 517-543-2091

Email: [email protected]

Trustworthy Equipment LLC is marketing this truck on behalf of the seller and helps connect qualified buyers with the appropriate party.

Buyers should independently verify the truck's condition, mileage, GVWR, grain-bed capacity, drivetrain operation, documentation, and suitability for their intended agricultural use before purchase.