Description :

Available now in Glenmoore, Pennsylvania, this 2026 New Holland L320 skid steer for sale has only 55 reported hours and is priced at $48,000 OBO. The machine is equipped with an open ROPS operator station, foot controls, and New Holland's Super Boom® vertical-lift design.

The seller reports that the machine also carries full warranty coverage through March 2030 or 3,000 hours, subject to the applicable warranty terms and transferability. With only 55 hours, this is an unusually low-hour opportunity for a buyer who wants a current-generation L320 without starting at typical new-machine pricing.

The reason for selling is straightforward: the machine was purchased but ultimately was not needed. The seller is motivated, says it must sell, and is open to reasonable offers.

2,000-Lb Rated Operating Capacity

The New Holland L320 sits in a useful mid-size skid-steer class. Published New Holland specifications rate the model at approximately:

• 2,000 lb rated operating capacity at 50% tipping load
• 4,000 lb tipping load
• 6,470 lb operating weight
• 67 gross engine horsepower

That combination makes the L320 suitable for a wide range of agricultural, construction, property-maintenance, landscaping, material-handling, and commercial applications.

For buyers who do not need one of the largest skid loaders on the market, a 2,000-lb ROC machine can provide an attractive balance between usable lifting capability, maneuverability, transportability, fuel consumption, and overall machine size.

New Holland Super Boom® Vertical Lift

One of the L320's most recognizable features is New Holland's Super Boom® vertical-lift geometry.

Unlike a radial-lift skid steer whose lift path moves outward and then back toward the machine, the Super Boom design is intended to provide strong vertical lift characteristics with useful reach at full height.

Published specifications for the L320 list approximately:

• 121 in. hinge-pin height
• 91.7 in. maximum dump height
• 29.8 in. dump reach at maximum height

That makes the machine useful for loading trucks, filling spreaders, stacking material, handling pallets, loading feed, moving aggregate, and other applications where lift height and forward reach matter.

Very Low 55 Reported Hours

The biggest individual selling point on this unit is its usage.

The seller reports only 55 hours on the machine.

For buyers comparing used skid steers, hours can make an enormous difference. A machine with just 55 hours has seen dramatically less operating time than the thousands of hours commonly found on used construction and agricultural skid loaders.

The low hours also make this machine particularly worth considering for a buyer who was already looking at new or nearly new equipment but would prefer the opportunity to negotiate with a motivated private seller.

A photo of the hour meter should be obtained and supplied to serious buyers for verification.

Open ROPS and Foot-Control Configuration

The seller describes this L320 as an open-cab/open-ROPS machine equipped with foot controls.

For operators who prefer traditional mechanical-style skid-steer operation, foot controls remain desirable because they provide a familiar operating layout without requiring an enclosed climate-controlled cab.

An open operator station can also be practical for farms, barns, landscaping operations, property maintenance, and other environments where operators frequently enter and exit the machine.

The exact control package and any additional factory options should be confirmed from the serial-number plate or original build information.

Current-Generation Diesel Power

New Holland currently rates the L320 at approximately 67 gross horsepower.

Published specifications for the current L320 model family commonly show a turbocharged four-cylinder diesel engine in the approximately 2.2-liter class, although exact engine identification should be verified from this individual machine's engine data plate before publishing a specific engine model number.

New Holland's 300 Series skid steers are designed around hydrostatic drive and compact dimensions while still providing enough power for demanding bucket, fork, grapple, and attachment work.

Hydraulic Attachment Capability

The L320 is designed to operate a variety of skid-steer attachments through its auxiliary hydraulic system.

Published specifications commonly list standard auxiliary hydraulic flow at approximately 20.6 GPM, depending on model configuration.

That gives the L320 useful capability with common attachments such as:

• General-purpose buckets
• Pallet forks
• Bale spears
• Grapples
• Augers
• Trenchers
• Snow equipment
• Brooms
• Material-handling attachments
• Light-duty hydraulic implements

The seller has not yet confirmed whether this particular unit has standard-flow or any optional hydraulic package, so buyers needing a specific hydraulic flow should verify the actual configuration.

Compact Size With Useful Capacity

The L320 has a published operating weight of approximately 6,470 lb before accounting for differences in attachment configuration.

New Holland also lists a wheelbase of approximately 44.4 inches, giving the machine a compact footprint while maintaining useful stability.

For farms, contractors, landscapers, nurseries, livestock operations, property owners, and rental users, that size can make the machine easier to maneuver in barns, around buildings, on construction sites, and in tighter work areas than larger skid loaders.

Remaining Warranty Is a Major Selling Point

The seller reports that this L320 retains full warranty coverage through March 2030 or 3,000 hours.

Combined with the machine's 55 reported hours, that could be an important consideration for a buyer comparing this machine with an older used skid steer that no longer carries manufacturer coverage.

Because warranty eligibility, transferability, exclusions, and expiration conditions are controlled by the warranty provider, serious buyers should verify the remaining coverage using the machine's serial number before purchase.

Why the Seller Is Selling

This is not being sold because the machine accumulated heavy hours or was replaced after years of work.

The seller reports that the L320 was simply not needed as originally anticipated.

As a result, it is now being offered with only 55 hours, and the seller would like to get it sold.

The current asking price is $48,000 OBO, and reasonable offers are encouraged.

Available in Glenmoore, Pennsylvania

The machine is located in Glenmoore, Pennsylvania, making it especially convenient for buyers throughout southeastern Pennsylvania and the surrounding Mid-Atlantic region.

Nationwide transportation assistance may also be available through independent transportation providers.

Financing assistance may be available to qualified buyers through independent financing providers. Approval, rates, terms, and conditions are determined by the financing provider.

Contact Trustworthy Equipment LLC for current availability, additional photos, warranty information, or to discuss this 2026 New Holland L320.

Trustworthy Equipment LLC is marketing this unit on behalf of the seller and can help connect qualified buyers with the appropriate party. Buyers are encouraged to inspect the machine and verify specifications and warranty coverage important to their purchase.