This Progress Model 60 chipper for sale in Freeport, Ohio is an industrial stationary wood chipper priced at $14,000 OBO. The identification plate shows Model 60, serial number 00 0095, and a rated operating speed of 600 RPM. Designed for commercial wood-processing environments, this type of large disc chipper may be suitable for sawmills, lumber operations, pallet plants, biomass facilities, and businesses handling slabs, trim blocks, roundwood, or wood waste. Progress is an established manufacturer of industrial wood-processing machinery, and comparable Progress 60-inch chippers remain in use and available through the secondary sawmill-equipment market. Buyers searching for a used stationary wood chipper in Ohio should inspect the machine and verify its exact knife configuration, drive requirements, feed setup, and discharge arrangement before purchase.
General Specs
Recent Repairs
- No specific recent repairs were provided by the seller.
- No rebuild information was supplied.
- Bearing replacement history was not provided.
- Chipper knife replacement or sharpening history was not provided.
Maintenance
- No documented maintenance history was supplied.
- Lubrication or bearing-service history has not been confirmed.
Included Equipment
- Progress Industries Model 60 chipper assembly shown in the photographs.
- Large multi-groove drive pulley is installed.
Known Issues or Disclosures
- Photographs show visible surface rust.
- Paint deterioration is visible in multiple areas.
- Machine appears to have been stored outdoors.
- Current operating condition has not been confirmed.
- Motor or power source has not been identified as included.
- Knife count has not been verified.
- Feed and discharge configuration should be confirmed.
- Buyers should inspect the machine prior to installation or operation.
The seller has provided limited ownership and operating-history information for this Progress Model 60 chipper.
The machine is currently located in Freeport, Ohio, and is being offered for $14,000 OBO. No specific information has been supplied regarding how long the seller has owned it, when it last operated, its previous production environment, maintenance history, or the reason for selling.
Based on the supplied photographs, the chipper has been stored outdoors and shows visible weathering, surface rust, and paint wear.
Buyers interested in putting the machine back into a production environment should conduct an independent mechanical inspection and confirm exactly what supporting components will be required.
Available in Freeport, Ohio, this Progress Industries Model 60 chipper for sale is a heavy-duty stationary wood chipper being offered at $14,000 OBO. Built for industrial wood-processing applications, this machine is a potential fit for sawmills, lumber operations, pallet facilities, biomass processors, and other businesses needing to reduce slabs, roundwood, trim material, or similar wood waste into usable chips.
The identification plate visible in the supplied photographs identifies the machine as a Progress Industries Model 60, serial number 00 0095, with a rated speed of 600 RPM. The exact production year has not been confirmed.
Heavy-Duty Progress Industries Chipper
Progress Industries has manufactured industrial chipping equipment for the wood-products industry for decades. Manufacturer information for Progress disc chippers describes heavy plate construction, stress-relieved steel chipper discs, heavy-duty spherical roller bearings, and replaceable wear areas designed around demanding production environments.
This Model 60 represents an older stationary industrial design rather than a small portable brush chipper. Its large disc housing, substantial belt-drive pulley, reinforced steel construction, and fixed mounting arrangement make it much more applicable to a mill or processing-line environment.
Model 60 Industrial Chipper Configuration
Published used-equipment records confirm that Progress produced 60-inch stationary wood chippers, including Model 60 and 60-6 configurations. Existing industry listings show Progress 60-inch machines in horizontal-feed, drop-feed, top-discharge, and bottom-discharge configurations, depending on the specific machine.
The exact feed orientation, discharge arrangement, knife count, and drive requirements of this particular machine should be confirmed before purchase.
Photographs of the Freeport unit show:
- Large enclosed circular chipper-disc housing
- Heavy industrial steel frame and housing
- Large multi-groove drive pulley
- Progress Industries identification plate
- Model 60 designation
- Serial number 00 0095
- 600 RPM rating
- Fixed/stationary mounting configuration
- Visible surface rust and paint wear consistent with outdoor storage and age
Designed for Wood-Processing Applications
A stationary chipper in this size class may be suitable for commercial operations processing wood material such as:
- Sawmill slabs
- Trim blocks
- Roundwood
- Mill waste
- Lumber-processing residue
- Wood material intended for biomass
- Raw material for additional chip screening or processing
Progress describes its industrial chipper line as being designed to convert roundwood and slabs into more uniform chips. The manufacturer has also used replaceable wear plates and heavy-duty disc construction in its chipper designs.
Actual production rate and maximum material size for this specific Model 60 have not been independently confirmed and should not be assumed from specifications for larger current Progress models.
Visible Condition
The photographs show an older industrial machine with visible cosmetic deterioration from age and exposure. Surface rust is present on the pulley, fasteners, seams, and various exterior steel components. Paint loss and oxidation are visible around several portions of the housing.
These observations are cosmetic only and should not be interpreted as a mechanical inspection.
No claim is being made that the machine has recently operated, has been rebuilt, has new knives, or has received recent bearing or drivetrain work because those details have not been provided.
Interested buyers should inspect:
- Chipper disc
- Knives and knife pockets
- Bearings
- Shaft
- Drive pulley
- Housing
- Wear plates
- Feed opening
- Discharge area
- Structural welds
- Guards
- Drive system requirements
before placing the unit into production.
A Potential Fit for Existing Mill Systems
For a buyer already operating conveyors, sawmill equipment, or a wood-waste processing line, an industrial stationary chipper can serve as part of a larger material-handling system.
Because this is not represented as a complete standalone chip-processing plant, buyers should verify what motors, guards, conveyors, electrical components, feed equipment, discharge components, foundations, and other supporting equipment will be required for their application.
Price and Location
This Progress Model 60 stationary wood chipper is located in Freeport, Ohio, and is priced at $14,000 OBO.
The seller is open to reasonable offers.
Trustworthy Equipment LLC is marketing the machine on behalf of the seller and can help connect qualified buyers with the appropriate party. Nationwide transportation assistance may also be available through independent hauling providers.
Because industrial chippers are highly configuration-specific, buyers are encouraged to arrange an inspection and verify dimensions, weight, knife configuration, power requirements, feed arrangement, discharge arrangement, and operating condition before purchase.
Specifications are believed to be accurate but are not guaranteed and may vary by unit. Buyers should independently verify all specifications, features, and condition prior to purchase.
The following specifications combine seller-provided information, information visible in the supplied photographs, and published information relating to Progress industrial chippers. Equipment may vary by serial number, production year, options, attachments, and configuration. Buyers should independently verify all specifications important to their purchase.
General Information
- Manufacturer: Progress Industries Inc.
- Model: 60
- Equipment Type: Stationary industrial wood chipper
- Year: Not confirmed
- Serial Number: 00 0095
- Rated Speed: 600 RPM
- Price: $14,000 OBO
- Location: Freeport, Ohio
- Condition: Used
- Seller Type: Not provided
Chipper Configuration
- Chipper Type: Industrial disc-style stationary chipper
- Nominal Model Size: Model 60 / commonly marketed as a 60-inch Progress chipper
- Disc Diameter: Exact measurement should be verified
- Knife Count: Not confirmed on this unit
- Feed Style: Verify
- Discharge Style: Verify
- Drive: Large multi-groove pulley visible
- Required Motor Horsepower: Not confirmed
- Production Capacity: Not confirmed
Comparable industry listings document Progress 60-inch chippers in 6-knife configurations, although that does not confirm that this particular machine is equipped with six knives.
Construction
Progress manufacturer literature for its industrial disc chippers describes:
- Heavy plate construction
- Welded and reinforced high-stress areas
- Steel chipper disc construction
- Heavy-duty spherical roller bearings
- Replaceable wear plates in high-wear areas
These are manufacturer characteristics of Progress chipper designs and should not be interpreted as confirmation of the current condition of this individual machine.
Power and Drive
- Power Source Included: Not confirmed
- Electric Motor Included: Not confirmed
- Drive Pulley: Installed and visible
- Pulley Type: Multi-groove belt pulley
- Rated Machine Speed: 600 RPM according to identification plate
- Electrical Requirements: Not provided
Dimensions and Weight
- Overall Length: Not confirmed
- Overall Width: Not confirmed
- Overall Height: Not confirmed
- Machine Weight: Not confirmed
- Foundation Requirements: Buyer to verify
Material Applications
Potential applications include:
- Roundwood
- Sawmill slabs
- Trim blocks
- Wood-processing waste
- Mill residual material
- Biomass feedstock preparation
Progress describes its chipper designs as equipment intended for processing roundwood and slabs into more uniform wood chips.
Buyers looking for a Progress Model 60 chipper for sale should consider this used stationary industrial wood chipper currently available in Freeport, Ohio, at an asking price of $14,000 OBO.
The machine is manufactured by Progress Industries Inc., a company known for industrial chippers and other wood-processing equipment. Progress describes its chipper systems as heavy-duty equipment designed for converting roundwood and slabs into uniform wood chips. Published manufacturer information highlights heavy plate construction, industrial bearing systems, replaceable wear areas, and disc-style chipping technology.
This particular unit is identified as Model 60, serial number 00 0095, with 600 RPM shown on the machine plate. Its production year, horsepower requirement, knife count, maximum feed size, and production capacity have not yet been confirmed.
Comparable used-equipment listings show Progress 60-inch stationary chippers offered in multiple configurations, including horizontal-feed, drop-feed, top-discharge, and bottom-discharge machines. Buyers should therefore verify the precise arrangement of this machine instead of assuming specifications from another Progress 60.
For sawmill operators throughout Ohio, Pennsylvania, West Virginia, and surrounding Midwest and Appalachian wood-products markets, this used Progress chipper may provide an opportunity to acquire a substantial industrial machine at a lower acquisition cost than many rebuilt or newer units.
Financing assistance may be available to qualified buyers through independent providers, and nationwide transportation assistance may be available through third-party equipment haulers.
Explore Similar Equipment
