Complete Circular Sawmill Package for Sale — $94,499 OBO
This circular sawmill package for sale in Barwick, Ontario, Canada, offers buyers an extensive collection of lumber-production machinery at a newly reduced price of $94,499 USD OBO.
The operation includes a 48-inch Simonds circular saw, 12-foot hydraulic carriage, four-head planer, Perkins 1004 Series diesel power unit, line-shaft system, Caterpillar 248D skid steer, sharpening equipment, specialized cutting knives, and additional material-handling machinery.
Originally offered at $105,000, the complete package has been reduced by $10,501.
The seller is finished with his lumber operation and wants the equipment sold. Reasonable offers are encouraged, with preference given to a buyer purchasing the entire setup.
Free delivery within approximately 1,200 miles may be available under the seller's stated conditions.
Watch the operating videos, review the equipment details, and contact Trustworthy Equipment LLC to discuss an inspection or submit an offer.
Recent Component Work and Upgrades
- Seller reports fewer than approximately 250 operating hours on the mill husk bearings.
- Seller reports fewer than approximately 250 operating hours on the line-shaft bearings.
- Quality replacement bearings were reportedly used.
- Perkins diesel engine reportedly has a nearly new gear-reduction starter.
- Top planer head was upgraded from five-grip to 10-inch gib-style.
- Bottom planer head was upgraded from five-grip to 10-inch gib-style.
- Upgraded planer heads reportedly use approximately 5/32-inch by 10-inch knives.
- Smaller pulley included for an alternative planer-speed arrangement.
- Specialty cutting knives and replacement tooling included.
- Seller reports that Cat 248D skid steer works well.
Maintenance and Tooling
- Automatic flat-knife sharpener included.
- Water tank and cooling pump included.
- Electric L-knife sharpener included.
- Diamond-wheel carbide-bit sharpener included.
- Multiple replacement planer knife sets included.
- Additional cutting heads and gibs included.
- Various related shop tools and support equipment included.
Known Issues and Disclosures
- Air compressor reportedly requires a high-pressure shutoff to work properly with the line-shaft system.
- Outfeed conveyor is not presently connected to power.
- Conveyor drums and belting are included.
- Concrete foundation is excluded from the sale.
- Exact Perkins engine variant, horsepower, and hours have not been confirmed.
- Cat 248D production year, hours, and serial number have not been confirmed.
- Final inventory should be independently verified.
- Buyer must assist with dismantling and loading under the seller's delivery arrangement.
- Electrical, hydraulic, mechanical, and site-installation requirements must be independently evaluated.
- Buyers should inspect the system, verify condition, and evaluate all safety and guarding requirements before purchase.
The seller assembled and operated this equipment as a connected lumber-production system for his own operation.
The circular sawmill, four-head planer, Perkins diesel power unit, line shaft, skid steer, conveyors, sharpening machines, tooling, and supporting accessories were used as parts of the same working setup.
During operation, he made improvements to important components, including upgrading the top and bottom planer heads and installing quality bearings in the mill husk and line shaft.
He also accumulated specialized cutting tools and knife profiles for manufacturing different types of finished lumber, including siding, flooring, tongue-and-groove boards, and custom stack-wall timbers.
The seller is now finished with this line of work and wants to move on.
Rather than advertise and sell individual knives, sharpening machines, conveyors, tools, and major pieces of equipment over an extended period, he would prefer to find one buyer interested in the complete operation.
That is the reason he has continued reducing the price and is now inviting serious offers at $94,499 USD OBO.
He would like the equipment to go to someone who can make productive use of the complete setup.
A further price reduction has been made on this circular sawmill package for sale in Barwick, Ontario, Canada, bringing the asking price down to $94,499 USD OBO. Originally listed at $105,000 and subsequently reduced to $94,999, the seller has now lowered the price another $500 and is encouraging interested buyers to make a reasonable offer.
The seller is finished with the lumber-production operation and is ready to sell the equipment. He would strongly prefer to move everything together rather than spend an extended period selling individual machinery, sharpeners, tools, and accessories.
This is an extensive complete sawmill operation featuring a 48-inch circular mill, hydraulic log carriage, four-head lumber planer, Perkins diesel-powered line shaft, Caterpillar 248D skid steer, sharpening equipment, conveyors, specialty planer knives, hydraulic components, sawdust-handling equipment, and additional shop tools.
According to the seller, the system was assembled and used as an operating lumber-production setup. The equipment was not simply collected from unrelated machines for resale.
The package includes nearly everything associated with the operation except the concrete foundation.
Major Price Reduction — Now $94,499 USD OBO
The asking price has been reduced in three stages:
- Original Asking Price: $105,000 USD
- First Reduction: $94,999 USD
- NEW ASKING PRICE: $94,499 USD OBO
- Total Reduction: $10,501 USD
The seller has indicated that he wants the equipment sold and is prepared to consider reasonable offers from serious buyers.
His preference is to sell the complete lumber-processing operation to one buyer. If the entire package does not sell together, the seller may consider selling components individually later, but the circular sawmill must sell first.
Buyers interested in the complete setup are encouraged to make an offer rather than assume the asking price is firm.
Watch This Sawmill and Equipment in Action
The seller has provided two videos showing the equipment.
Video 1 — Sawmill Operation
Video 2 — Additional Equipment Footage
These videos give prospective buyers an opportunity to review the equipment before arranging a more detailed inspection.
48-Inch Circular Sawmill with Hydraulic Carriage
The primary cutting equipment is a stationary circular sawmill fitted with a 48-inch Simonds circular saw blade, carbide cutting bits, and Simolock-style shanks.
The mill includes a 12-foot hydraulic carriage intended to move and position logs through the cutting process.
Seller-reported features include:
- 48-inch Simonds circular saw blade
- Carbide cutting bits
- Simolock-style saw shanks
- 12-foot log carriage
- Hydraulic carriage drive
- Hydraulic log turner
- Hydraulic headblocks
- Adjustable forward carriage speed
- Fast carriage reverse
- Steel I-beam log deck
- 14-inch vertical edger
- Hydraulic edger adjustment
- Approximately 1,000-pound flywheel
- Outfeed conveyor components
- Conveyor drums and belting
The hydraulic log turner and headblocks assist with positioning logs, while the adjustable carriage feed helps the operator control how material passes through the saw.
The seller reports that the husk and line-shaft bearings have fewer than approximately 250 operating hours and that quality replacement bearings were used.
This reported bearing time applies to those components, not to the overall operating hours of the entire mill.
For additional technical context, Simonds International provides information about its Simalock carbide-tipped sawbits and shank system. Buyers should verify the precise bit and shank dimensions installed on this particular saw.
Four-Head Planer for Sale as Part of the Complete Package
One of the important features of this package is the included 8-by-12-inch four-head lumber planer.
The planer has a seller-reported two-speed configuration and comes with an extensive assortment of cutting heads, knives, gibs, and specialty tooling.
For an operator planning to manufacture finished lumber rather than exclusively rough-sawn boards, the planer expands the potential applications of the overall system.
The seller reports that both the top and bottom planer heads were upgraded from five-grip configurations to 10-inch gib-style heads.
The upgraded heads reportedly use approximately 5/32-inch by 10-inch knives.
A smaller pulley is also included for buyers considering a different planer-speed configuration, subject to appropriate mechanical verification.
Specialty Planer Knives and Lumber Profiles
The included knife inventory is intended to support several lumber products and finishing applications.
Seller-reported profiles include:
- Log siding
- Cove siding
- Shiplap lumber
- Tongue-and-groove boards
- Hardwood flooring
- Relief-cut flooring
- Eased-edge decking
- 1½-inch tongue-and-groove lumber
- Specialty 4-by-4 stack-wall timbers
- Double tongue-and-groove stack-wall profiles
The seller reports that two sets of many of the knife profiles are included.
He also reports that the specialty 4-by-4 stack-wall knives were custom manufactured using AR400 steel.
These cutting profiles may appeal to buyers producing specialty lumber for barns, agricultural buildings, cabins, log structures, flooring, siding, decking, and other custom woodworking applications.
Perkins Diesel Sawmill Power System
The operation includes a Perkins 1004 Series industrial diesel engine connected to a line-shaft power system.
This power arrangement formed part of the seller's complete mill configuration.
The line shaft includes removable shaft couplings, which may make servicing and accessing certain components more convenient.
The seller also reports that the Perkins engine has a nearly new gear-reduction starter.
Included components are:
- Perkins 1004 Series diesel engine
- Gear-reduction starter
- Complete line-shaft arrangement
- Removable shaft couplings
- Hydraulic pump
- Hydraulic lines
- Approximately 20-gallon hydraulic reservoir
- Associated mechanical drive components
Perkins manufactured multiple engine variants within the 1004 family. The engine identification plate should be checked before establishing its exact horsepower, displacement, configuration, and replacement-parts requirements.
Buyers can consult the official Perkins operation and maintenance manual resources to identify the appropriate documentation for the installed engine.
Hydraulic Log Handling and Mill Controls
Hydraulic equipment is an important part of the sawmill configuration.
The seller reports hydraulic operation for the carriage drive, log turner, headblocks, and vertical-edger adjustment.
The included system also has a hydraulic pump, hydraulic lines, and an approximately 20-gallon hydraulic-oil tank.
These components work together to support log positioning and material movement through the cutting operation.
Buyers relocating the system should examine hose condition, pump capacity, control valves, connections, reservoir placement, and the installation layout before placing the equipment back into service.
Caterpillar 248D Skid Steer Included
The package includes a Cat 248D skid steer loader, which the seller reports works well.
Two attachments are included:
- General-purpose bucket
- Pallet forks
Having a skid steer available with the sawmill package may be useful for material movement, pallet handling, cleanup, and general work around a lumber-processing facility.
The 248D is included in the package rather than being offered as a separate purchase at this time.
The machine's exact year, operating hours, serial number, and installed options should be confirmed during inspection.
Sharpening Equipment and Replacement Tooling
In addition to the primary mill and planer, the sale includes several machines and accessories intended for maintaining cutting tools.
Seller-reported equipment includes:
- Automatic electric flat-knife sharpener
- Water tank
- Cooling pump
- Electric L-knife sharpener
- Diamond-wheel saw-bit sharpener
- Cordless-drill-powered saw-bit sharpening arrangement
- Extra planer heads
- Extra planer gibs
- Extra planer knives
- Multiple specialty knife profiles
- Related sharpening equipment and accessories
This equipment may help the next operator maintain cutting tools onsite rather than relying exclusively on outside sharpening services.
The included tooling inventory is an important consideration for buyers comparing a complete operating package with a standalone sawmill purchase.
Conveyors, Sawdust Handling and Additional Equipment
The package also includes material-handling and sawdust-related equipment.
Reported items include:
- 12-inch blower
- Blower piping
- Additional ductwork
- Outfeed conveyor
- Conveyor drums
- Conveyor belting
- No. 80 roller chain
- Components for sawdust-removal equipment
- Air compressor
- Lumber-banding equipment
Important disclosure: The outfeed conveyor is not presently connected to power. The seller reports that its drums and belting are included.
The included air compressor reportedly needs a high-pressure shutoff installed or corrected to work properly with the line-shaft arrangement.
Prospective buyers should examine these components and determine what additional electrical or mechanical work is required.
Additional Shop Tools and Accessories
The seller is also including assorted equipment used around the lumber operation.
Items reportedly included are:
- Metal toolbox
- Wooden work surface
- Wrench set
- ¼-inch drive socket set
- ⅜-inch drive socket set
- ½-inch drive socket set
- Lumber moisture tester
- Electronic battery-powered tachometer
- Smaller planer-speed pulley
- Extra cutting heads and knives
- Additional duct piping
- Extra roller chain
- Assorted operating parts and accessories
The extent of this inventory adds to the package's usefulness for buyers who want more than the primary machinery.
A complete itemized inventory should be confirmed with the seller before purchase.
Free Delivery Within Approximately 1,200 Miles
Transportation is a significant consideration with machinery of this size.
The seller is offering free delivery within approximately 1,200 miles (roughly 2,000 kilometers), subject to final agreement.
The buyer must participate in dismantling and loading the equipment.
Before completing a purchase, both parties should agree upon:
- The final delivery destination
- Dismantling and loading responsibilities
- Transportation equipment and number of loads
- Unloading arrangements
- Delivery scheduling
- Route restrictions and permits
- Customs and import documentation where applicable
- Insurance and any additional transportation expenses
Because the equipment is located in Ontario, buyers in the United States should also confirm applicable cross-border import requirements.
The delivery offer is made by the seller and is subject to mutually agreed terms. Trustworthy Equipment LLC is not the transportation carrier.
Who Would Benefit from This Lumber-Production Package?
The combination of primary sawing machinery, finished-lumber capability, material handling, and support equipment may appeal to several types of buyers.
Potential applications include:
- Established sawmill businesses expanding operations
- Entrepreneurs establishing a small lumber-production facility
- Custom lumber manufacturers
- Hardwood flooring producers
- Tongue-and-groove lumber manufacturers
- Agricultural building-material suppliers
- Siding and decking producers
- Log-home and cabin material manufacturers
- Stack-wall timber producers
- Forestry and timber-processing businesses
- Amish and Plain Community-operated lumber facilities
For buyers comparing an individual mill with a larger integrated system, the included planer, skid steer, sharpening equipment, tooling, and material-handling components warrant particular attention.
Everything Except the Concrete Foundation
The seller's description of the offering is straightforward: nearly everything associated with his lumber operation is included, except the concrete it sits on.
The equipment has a history of being used as an assembled operating system, although dismantling, transporting, reinstalling, and commissioning it at another property will require planning.
A buyer should independently evaluate the required foundation, power systems, shaft alignment, mechanical guarding, dust control, and overall installation requirements.
The asking price reflects the complete package being offered, not a guarantee of future production output or installation costs.
Seller Ready to Sell — Make a Reasonable Offer
This used Ontario circular sawmill and associated lumber-production equipment are now being offered at $94,499 USD OBO.
The seller has already reduced the price by $10,501 from the original asking amount.
He is finished with this business operation, prefers to sell everything together, and is encouraging serious buyers to submit offers.
Interested buyers can also explore additional sawmill and forestry equipment through Trustworthy Equipment.
Contact Trustworthy Equipment LLC today to ask questions, request additional information, coordinate an inspection, discuss delivery, or present your best reasonable offer to the seller.
Specifications are believed to be accurate but are not guaranteed and may vary by unit. Buyers should independently verify all specifications, features, and condition prior to purchase.
The following specifications combine seller-provided information with published manufacturer or model specifications where available. Specifications may vary by production year, serial number, options, attachments, and configuration. Buyers should verify specifications important to their intended use.
General Information
| Specification | Details |
|---|---|
| Equipment | Complete circular sawmill and planer package |
| Condition | Used |
| Seller-Reported Mill Condition | Excellent |
| Location | Barwick, Ontario, Canada |
| Asking Price | $94,499 USD OBO |
| Original Asking Price | $105,000 USD |
| Previous Price | $94,999 USD |
| Total Price Reduction | $10,501 USD |
| Sale Preference | Complete package |
| Power Arrangement | Perkins diesel with line shaft |
| Included Loader | Caterpillar 248D skid steer |
| Delivery Offer | Free within approximately 1,200 miles, subject to conditions |
Circular Sawmill
| Specification | Details |
|---|---|
| Configuration | Stationary circular sawmill |
| Main Blade | 48-inch Simonds |
| Cutting Teeth | Carbide bits |
| Shanks | Simolock-style |
| Carriage Length | 12 feet |
| Carriage Drive | Hydraulic |
| Log Turner | Hydraulic |
| Headblocks | Hydraulic |
| Forward Feed | Adjustable |
| Reverse | Fast reverse |
| Log Deck | Steel I-beam |
| Vertical Edger | 14 inches |
| Edger Adjustment | Hydraulic |
| Flywheel | Approximately 1,000 pounds |
| Husk Bearings | Fewer than approximately 250 hours, seller-reported |
| Line-Shaft Bearings | Fewer than approximately 250 hours, seller-reported |
| Outfeed Conveyor | Included, not presently powered |
| Conveyor Drums and Belting | Included |
Four-Head Planer
| Specification | Details |
|---|---|
| Planer Type | Four-head lumber planer |
| Nominal Capacity | 8 × 12 inches |
| Number of Heads | Four |
| Speed Configuration | Two speed |
| Top Head | Upgraded 10-inch gib-style |
| Bottom Head | Upgraded 10-inch gib-style |
| Knife Dimensions | Approximately 5/32 × 10 inches |
| Replacement Knives | Multiple sets included |
| Additional Pulley | Included |
| Extra Heads | Included |
| Extra Gibs | Included |
Lumber Profiles and Cutting Applications
- Log siding
- Cove siding
- Shiplap
- Tongue-and-groove lumber
- Hardwood flooring
- Relief-cut flooring
- Eased-edge decking
- 1½-inch tongue-and-groove
- Specialty 4-by-4 stack-wall timbers
- Double tongue-and-groove stack-wall profiles
- Custom AR400 steel knives, seller-reported
Perkins Diesel Power Unit
| Specification | Details |
|---|---|
| Manufacturer | Perkins |
| Engine Family | 1004 Series |
| Fuel | Diesel |
| Application | Industrial power unit |
| Drive Arrangement | Line shaft |
| Starter | Nearly new gear-reduction starter, seller-reported |
| Shaft Couplings | Removable |
The exact engine variant should be identified from the engine data plate before applying model-specific horsepower or other factory ratings.
Line-Shaft and Hydraulic System
| Specification | Details |
|---|---|
| Line Shaft | Complete arrangement included |
| Couplings | Removable |
| Hydraulic Carriage Drive | Included |
| Hydraulic Log Turner | Included |
| Hydraulic Headblocks | Included |
| Hydraulic Edger Adjustment | Included |
| Hydraulic Pump | Included |
| Hydraulic Lines | Included |
| Hydraulic Reservoir | Approximately 20 gallons |
Caterpillar Skid Steer
| Specification | Details |
|---|---|
| Manufacturer | Caterpillar |
| Model | 248D, seller-reported |
| Equipment Type | Wheeled skid steer loader |
| Fuel | Diesel |
| General-Purpose Bucket | Included |
| Pallet Forks | Included |
| Operating Condition | Seller reports works well |
Sharpening Equipment
- Automatic electric flat-knife sharpener
- Water tank
- Cooling pump
- Electric L-knife sharpener
- Diamond-wheel saw-bit sharpener
- Cordless-drill-powered sharpening arrangement
- Multiple replacement planer knife sets
- Additional sharpening accessories
Sawdust and Material Handling
| Specification | Details |
|---|---|
| Blower Diameter | 12 inches |
| Blower Piping | Included |
| Additional Ductwork | Included |
| Outfeed Conveyor | Included |
| Conveyor Drums | Included |
| Conveyor Belting | Included |
| Roller Chain | No. 80 |
| Air Compressor | Included; high-pressure shutoff required |
| Lumber-Banding Equipment | Included |
Additional Tools and Accessories
- Metal toolbox
- Wooden work surface
- Wrench set
- ¼-inch drive socket set
- ⅜-inch drive socket set
- ½-inch drive socket set
- Lumber moisture tester
- Electronic tachometer
- Extra planer heads
- Extra planer gibs
- Extra knives
- Smaller planer-speed pulley
- Additional piping
- Extra roller chain
- Assorted operating components
Transportation and Installation
| Specification | Details |
|---|---|
| Seller Delivery Radius | Approximately 1,200 miles / 2,000 kilometers |
| Delivery Charge Within Agreed Radius | Free, subject to seller's conditions |
| Dismantling | Buyer participation required |
| Loading | Buyer participation required |
| Concrete Foundation | Not included |
| Cross-Border Transportation | Documentation and requirements to be confirmed |
| Unloading | Terms to be agreed upon |
Used Circular Sawmill and Lumber-Processing Equipment in Ontario
Buyers searching for a complete wood-processing operation often need to evaluate more than the sawmill itself. Material handling, secondary lumber finishing, cutting-tool maintenance, and power transmission can all influence the overall cost and practicality of establishing a production facility.
This package in Barwick, Ontario, combines primary circular sawing machinery with additional equipment intended to support several stages of lumber production.
Primary Sawing and Lumber Finishing
The seller-reported 48-inch circular saw and 12-foot hydraulic carriage provide the primary log-processing arrangement.
Its hydraulic log turner, adjustable carriage feed, headblocks, and vertical edger are important features for buyers evaluating the system's handling and cutting configuration.
The accompanying four-head planer broadens the operation beyond basic rough-lumber production.
Included specialty tooling supports applications such as tongue-and-groove flooring, siding, decking, and specialty timber profiles.
Diesel Line-Shaft Configuration
For buyers specifically seeking a Perkins diesel sawmill, the included 1004 Series engine and line-shaft arrangement are distinguishing features.
This mechanical power configuration may be of particular interest to operators experienced with shaft-driven lumber-processing equipment, including certain agricultural and Plain Community businesses.
Proper shaft alignment, guarding, speed compatibility, and power requirements should be evaluated before reinstallation.
Equipment, Transportation and Buyer Considerations
The package includes a Cat 248D skid steer with bucket and pallet forks, along with sharpening machines, conveyors, dust-handling components, hydraulic equipment, and assorted tools.
These additional items should be reviewed as part of the total purchase rather than evaluated solely as incidental accessories.
The seller's reported offer of free delivery within approximately 1,200 miles may make this used circular sawmill in Ontario worth considering for qualified buyers in Canada and parts of the United States.
Import requirements, dismantling responsibilities, and installation expenses must still be confirmed.
The seller is offering the complete operation at $94,499 USD OBO and is encouraging interested buyers to make a serious offer.
Explore Similar Equipment
