Skip to content

Used Excavators for Sale

Choose an excavator by trench depth, swing clearance and loaded transport dimensions.

2019 Doosan DX85R excavator

Newest available

Available inventory

More specifications
Search by miles
Clear filters

3 available excavators

Show map

Approximate city-centre locations for all matching listings.

Buying Excavators

What fits the job

Measure trench depth, the reach needed from a stable setup, overhead clearance and the narrowest point on the route. Use the dig chart for the boom and stick actually fitted. For lifting pipe or structures, ask for the lift chart for that configuration and radius.

What to inspect

Ask for a cold start and a warm demonstration of travel, swing, lift and bucket curl. Check for leaks, pin and bushing play, uneven track wear and movement in the swing bearing. Ask an inspector to measure any suspected play.

What to ask the seller

Which boom, stick, bucket and coupler are included? Ask for the serial plate and loaded transport dimensions. If you plan to run a breaker or auger, confirm the auxiliary flow, pressure and return circuit on the machine.

How many machine moves does your trench require?

Sketch a typical run with the trench depth, spoil pile and places the machine can stand. Ask the dealer to mark the usable digging range for the boom, stick and bucket on offer. Count the moves along that run. Two excavators that reach the same depth can leave you spending different amounts of the day repositioning.

Used excavator inspection checklist

What to inspect

  • On a tracked machine, inspect both tracks, sprockets, rollers and idlers. Look for uneven wear, damaged track pads or rubber, and leaks around the final drives. Ask for measured wear against manufacturer limits.
  • With the attachment lowered, examine the boom, stick, bucket linkage and coupler for damage, repairs or loose pins. Ask a technician to assess swing-bearing and joint play if there is visible movement or noise.
  • Ask the seller to demonstrate travel, swing, boom, stick and bucket operation in a clear area. Have the operator show the coupler lock and auxiliary functions using the manufacturer’s procedure.

Questions for the seller

  • When were the tracks, sprockets, rollers or final drives last replaced? Do you have an undercarriage report or invoices?
  • What buckets and coupler are included? Was it used with a breaker or in demolition, and are there records of any structural repairs?

Photos to request

Ask for the serial plate and meter, each track and sprocket, both final drives, the boom foot, stick-to-bucket pins, coupler and any repaired areas.

Have a qualified operator demonstrate the machine according to its manual. Keep bystanders clear of moving equipment and stay out from under raised attachments. Use an independent inspection for wear measurements or repairs you can’t verify.