
2019 Doosan DX85R
East Bernstadt, Kentucky
Stock #AM033
Choose an excavator by trench depth, swing clearance and loaded transport dimensions.

3 sold excavators
Approximate city-centre locations for all matching listings.



Measure trench depth, the reach needed from a stable setup, overhead clearance and the narrowest point on the route. Use the dig chart for the boom and stick actually fitted. For lifting pipe or structures, ask for the lift chart for that configuration and radius.
Ask for a cold start and a warm demonstration of travel, swing, lift and bucket curl. Check for leaks, pin and bushing play, uneven track wear and movement in the swing bearing. Ask an inspector to measure any suspected play.
Which boom, stick, bucket and coupler are included? Ask for the serial plate and loaded transport dimensions. If you plan to run a breaker or auger, confirm the auxiliary flow, pressure and return circuit on the machine.
Sketch a typical run with the trench depth, spoil pile and places the machine can stand. Ask the dealer to mark the usable digging range for the boom, stick and bucket on offer. Count the moves along that run. Two excavators that reach the same depth can leave you spending different amounts of the day repositioning.
Ask for the serial plate and meter, each track and sprocket, both final drives, the boom foot, stick-to-bucket pins, coupler and any repaired areas.
Have a qualified operator demonstrate the machine according to its manual. Keep bystanders clear of moving equipment and stay out from under raised attachments. Use an independent inspection for wear measurements or repairs you can’t verify.